boot started to get wet,not an issue as i have a boot liner thats waterproof but the high level brake light seal had failed,lr dont sell as a part but ebay,£5.50 great stuff

Very common
Smear silicone grease on both sides of your old seal, 2008 xs
Snorkel
raised axle/gearbox breathers
Mantec tank guard
Cb radio
Blanked EGR
Sump guard
Scratches
Snolkle

That seems to do the trick for me also

i got a replacement seal from ebay.. fitted this and a layer of vaseline but it seems to be worse now!! debating calling land rover

Did a write up 18 months ago. You can silicone them in but use non acid type silicone (costs far more though). Have a search for my write up.  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

I believe there's an o-ring in the screenwash fitting which can get overlooked. Did you check that? Most people seem to find silicone sealant (clear) on the seal will do the job. LR replaced the whole light twice under warranty on my last FL2. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.