Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > re trolley jack recommendations
Post Reply  Down to end
Page 3 of 3 <123
Print this entire topic · 
weekender



Member Since: 11 Mar 2017
Location: derbyshire
Posts: 51

2012 Freelander 2 TD4 XS Manual Baltic Blue

hi, where we live the neighbours ( sorry Censored ) park all over the Censored place.

your machine - seems to be the perfect piece of kit to clean up our close

Post #322592 29th Apr 2017 5:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Jimbobaroobob



Member Since: 10 Jun 2016
Location: Derbyshire
Posts: 51

United Kingdom 2007 Freelander 2 TD4 GS Manual Stornoway Grey
Adaptor

Hello all
Just to clarify, if using a trolley jack on the jack points on the sills, is there an adaptor available to use between the jack and the sill or can a piece of thick rubber/ wood be used to spread the load and avoid damage to the sill?

The fitting on the spare wheel/ jack supplied with the car is a 'U' shaped channel to fit around the sill.

Thanks for any advice.

Post #328871 10th Aug 2017 10:35 am
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

Jimbob, You can buy rubber adaptor blocks on Ebay that have a slot that fits the sill profile to prevent damage. They are less than a fiver to buy. A search for trolley jack pad will bring up loads and I am sure someone will post a link to the one that they have bought and found to be ok. Hope this helps Thumbs Up

Post #328876 10th Aug 2017 11:18 am
View user's profile Send private message View poster's gallery Reply with quote
pab



Member Since: 28 Aug 2012
Location: Now in Mid-Wales
Posts: 2006

United Kingdom 2009 Freelander 2 TD4 XS Manual Lago Grey

The slot is just to stop the jack from slipping, I believe, and is not so necessary for a trolley jack. I just use a small block of wood with mine (mainly because it has a cup which is larger than the normal jacking point). Tyre shops, I've noticed, just seem to use the trolley jack as-is.

Personally, I only use the sills to jack the rear - there are convenient trolley jacking points at the front of the car, but unfortunately the only rear trolley jack point is underneath the Haldex and not that easily accessible.

Post #328882 10th Aug 2017 1:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Jimbobaroobob



Member Since: 10 Jun 2016
Location: Derbyshire
Posts: 51

United Kingdom 2007 Freelander 2 TD4 GS Manual Stornoway Grey

Many thanks for the replies all.

I think the slot is so the weight is taken on the lower surface of the sill rather than the edge of the welded joint?

Post #328981 11th Aug 2017 5:12 pm
View user's profile Send private message View poster's gallery Reply with quote
MartynB



Member Since: 08 Aug 2011
Location: Currently Rootless !
Posts: 1777

United Kingdom 2009 Freelander 2 TD4 GS Auto Zermatt Silver

when using a trolley jack the rubber pad spreads the "lift " over 125 mm rather than say 6mm if there are two points of contact on the trolley jack cup . I use the rubber puck that came with my jack, the " seam" pushes Into it and leaves a line. Before I had the new jack I used my old crap trolley jack and a block of wood to the same effect Thumbs Up 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .

Post #328988 11th Aug 2017 5:47 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 3 of 3 <123
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site