Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Bubbling on sills
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Treefrog99



Member Since: 27 Jan 2017
Location: Derbyshire
Posts: 5

United Kingdom 2007 Freelander 2 TD4 GS Manual Indus Silver
Bubbling on sills

I purchased my Freelander2 from a dealer last November
MY 2008 60k miles and apparently in V Good condition.
Whilst cleaning the car last weekend I noticed some bubbling in front of the wheel arch
at the lower part of the sill.
Worse on the driver’s side than the passenger side.

Question
Has anyone else got this problem?
Best way to fix it?
A bit of a long shot this one - Is there any responsibility back to the dealer.

Any help guidance much appreciated

Trevor

Post #328745 8th Aug 2017 9:40 am
View user's profile Send private message View poster's gallery Reply with quote
RogB



Member Since: 16 Dec 2014
Location: Mansfield
Posts: 3880

England 2013 Freelander 2 SD4 HSE Lux Auto Santorini Black

very much doubt that you will have any come back on the dealer for that. Not unless he is a very very very nice dealer.

other than than, strip any trim away to expose everything, sand it down, treat it, prime and respray it... its a 9 year old motor bought from an independent dealer so wont be 100% perfect.

Post #328746 8th Aug 2017 9:53 am
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2594

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

I suspect it's the stupid rubber edge "protectors " that have caused it more trouble than they are worth trapping debris and moisture in. Clean off all paint and rust until it's sound treat with rust killer primer then top coat and clear coat rub down with fine wet and dry until it's blended in lots of polish then wax,sounds easy doesn't it ? Mr. Green

Post #328748 8th Aug 2017 10:12 am
View user's profile Send private message View poster's gallery Reply with quote
MartynB



Member Since: 08 Aug 2011
Location: Currently Rootless !
Posts: 1781

United Kingdom 2009 Freelander 2 TD4 GS Auto Zermatt Silver
Re: Bubbling on sills

Treefrog99 wrote:
I purchased my Freelander2 from a dealer last November
MY 2008 60k miles and apparently in V Good condition.
Whilst cleaning the car last weekend I noticed some bubbling in front of the wheel arch
at the lower part of the sill.
Worse on the driver’s side than the passenger side.

Question
Has anyone else got this problem?
Best way to fix it?
A bit of a long shot this one - Is there any responsibility back to the dealer.

Any help guidance much appreciated

Trevor


most lifestyle SUVs never saw anything other than Sainsbury's car park, but the Freelander 2 is frequently found getting its wheels muddy. Couple that with it being built with only "road grade " underbody protection , 9 years of road salt , and a few owners who never washed underneath and you have a recipe for tin worm. Even the fabled Defender chassis rusted faster than a fast thing if owners didn't upgrade the Under body protection. Use a Phosphoric Acid based rust stabiliser when you get back to the metal before repainting.

I doubt you have any bodywork claim on a 9 year old car , unless you bought it with a comprehensive 12 month warranty. If you bought it from a LR main dealer though, I'd be going back and having the discussion with them 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .

Post #328751 8th Aug 2017 11:07 am
View user's profile Send private message View poster's gallery Reply with quote
bxzx16v



Member Since: 11 Jul 2013
Location: Sunny Sheffield
Posts: 629

England 2012 Freelander 2 SD4 Sport Auto Barolo Black

SYFL2 wrote:
I suspect it's the stupid rubber edge "protectors " that have caused it more trouble than they are worth trapping debris and moisture in. Clean off all paint and rust until it's sound treat with rust killer primer then top coat and clear coat rub down with fine wet and dry until it's blended in lots of polish then wax,sounds easy doesn't it ? Mr. Green


Just got this job to do on mine too , the edge protectors got removed when I got the car .

Mark 2009 FL2 TD4 SE (Sadly gone)
2007 FL2 TD4 GS (The wifes , gone after 8 great years)
2012 FL2 SD4 SPORT LE(Gone and missing it)
2015 DISCOVERY SPORT 2.2SD4 HSE (Now gone)
2014 Ford Bmax 1.0 ecoboost ( Gone but what next )
2014 Ford Focus 2.0tdci Zetec S (Gone,but what a car)
2020 Ford Fiesta ActiveX 1.0 Ecoboost
2024 Skoda Kodiaq 1.5 Tsi SEL

Post #328766 8th Aug 2017 3:26 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site