Kostaschrys wrote:

As I said before I had mine changed a week ago, but now water is coming in from the wash wiper system. I think that the little orifice is not sitting properly on the light assembly. I will go back to the dealers tomorow. Any idea?

aside from my current MY13 - all my previous FL2's have leaked badly.

a bit cr@p for an offroad all weather car, really. 

I have the leak from the washer nozzle. I have the light apart but can't figure out how to remove the nozzle without busting something! Any ideas please.

I was able to pull the nozzle straight off without damaging anything and found that the rubber O-ring had perished. I wasn't sure if the O-ring should sit in the recess near the tip of the nozzle or further up the nozzle against the flange. I tried a 5.5 mm x 1mm O-ring against the flange and couldn't get the nozzle to engage, so ended up fitting a 4.5mm x 1mm O-ring in the recess. It hasn't leaked since.

Thank you so much for the help. I managed to remove the nozzle without breakage by just pulling and hoping! I found an 'o' ring to fit and it all went back together very easily. And no water so far, fingers crossed!

By the way this forum is priceless. Just so much knowledge is in here.

There's a video here showing how to change the brake light, but they don't mention the O ring on the washer jet which came away when I changed mine.

Aaaaaaaaargh spotted the dreaded drip from the interior of the brake light today
Yet another job for when the weather improves No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Just had mine done under warranty - Looks like they replaced the whole unit  MY 09 GS manual in Lago Grey, Wood Co arm rest and side bumper strips - now sold.

MY 15 SD4 SE Auto Orkney Grey with colour coded Bumper Door Mouldings

Yes under warranty they will do the whole unit. Had mine replaced TWICE on my MY13. Sold it before it needed a third replacement. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Ditto - had my wife's 54 plate done under warranty twice...

FOUND IT!!

The first real bodge up on my car when I tried to pop the light unit by releasing the two retaining clips it would not budge - reason - some p**t had fitted the high level unit with what looks like roofing mastic!
It's obviously leaked before at some stage prior to my ownership.
Cleaned it all off and re-fitted with E profile weatherproof tape and it's seated fine with no leaks.
While I was there I upgraded the filament bulb to an LED which better matches the brake lights.
Forgot about pics until it was too late No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Hi All

I have the leak on my MY13

Can anyone tell me if this will do the trick?

https://www.amazon.co.uk/10m-Assorted-Prof...6CC4PE11ZA

Just apply a strip around the light and re fit?

Thanks

Westy you got a pic of the led bulb in action? MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Actually i just read the bullin - some black silicone sealant should do the trick?

https://www.amazon.co.uk/general-purpose-S...waterproof

LR NUT wrote:

Westy you got a pic of the led bulb in action?