Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Swirl Flaps
Post Reply  Down to end
Page 5 of 14 <123 456 ... 121314>
Print this entire topic · 
Pal



Member Since: 28 Nov 2015
Location: Budapest
Posts: 45

Hungary 2007 Freelander 2 TD4 HSE Auto Stornoway Grey

sure, the EGR I will blank the EGR definitely... Also no fault message due to closing the EGR?
regarding the flaps there must be a reason why they have put it there, so I'll replace the manifold to a new one, close the EGR and that's it.

Post #300793 15th Jun 2016 10:23 am
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

I've posted the reason a few posts above, on the previous page... Very Happy

Post #300802 15th Jun 2016 2:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Pal



Member Since: 28 Nov 2015
Location: Budapest
Posts: 45

Hungary 2007 Freelander 2 TD4 HSE Auto Stornoway Grey

yes I saw, it was more like for convincing myself Smile

Thanks Alex

Post #300803 15th Jun 2016 2:20 pm
View user's profile Send private message View poster's gallery Reply with quote
jupovic



Member Since: 20 Jan 2015
Location: Zvolen
Posts: 3

Slovakia 2007 Freelander 2 TD4 S Manual Baltic Blue

2007, no DPF, no fault message, after blanking EGR no roads - more fun

Post #300814 15th Jun 2016 6:59 pm
View user's profile Send private message View poster's gallery Reply with quote
dunkley201



Member Since: 09 Jul 2011
Location: Lincolnshire
Posts: 2739

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

I fitted an EGR blank a couple of months ago. Not noticed any difference in engine running or fuel consumption. Took a holiday to Scotland in May/June towing the caravan. No problem there either, possibly marginally better fuel economy. Now I an pondering the swirl flaps..... 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

Post #300832 16th Jun 2016 8:34 am
View user's profile Send private message View poster's gallery Reply with quote
pab



Member Since: 28 Aug 2012
Location: Now in Mid-Wales
Posts: 2007

United Kingdom 2009 Freelander 2 TD4 XS Manual Lago Grey

I've been running an EGR blank for more than a year now, largely in an attempt to prevent any issues with the swirl flaps. I didn't notice any significant change in fuel consumption, but the engine is slightly more responsive at moderate power settings (which is as you'd expect as that's where the EGR operates and blanking it means the engine is getting clean air where before it was getting a dose of exhaust fumes), and there's a slight change to the engine note too. The changes are subtle but discernable.

Post #300836 16th Jun 2016 9:03 am
View user's profile Send private message View poster's gallery Reply with quote
Pal



Member Since: 28 Nov 2015
Location: Budapest
Posts: 45

Hungary 2007 Freelander 2 TD4 HSE Auto Stornoway Grey

EGR must go...

Does anybody please know the LR refernce for the manifold with flaps?

Post #300896 17th Jun 2016 12:24 pm
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

You will find the reference in the below thread, which, by the way, should be merged with this as it is about the same thing....
www.freel2.com/forum/topic19543.html

Admin - threads merged

Post #300906 17th Jun 2016 6:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Sparkes



Member Since: 18 Mar 2013
Location: Swansea / Cheltenham
Posts: 102

United Kingdom 2007 Freelander 2 TD4 GS Manual Zermatt Silver

Hey! One of my glow plugs has failed so as I'm replacing them I'm toying with the idea of tackling the swirl flaps however I'm not sure which is the best way to tackle them. The car has done 120k miles.

Is it possible to blank them when they are still in place? I'm looking for the easiest solution as the car is required daily.

Or, is it an idea just to buy a new air intake manifold with the swirl flaps and take the chance?

All thoughts and observations welcome.

Many thanks,


Andrew 2007 LR Freelander 2 GS - factory tints, LR mud flaps, 2013 facelift)
Problems/solutions include: rear diff pinion replaced, stearing rack and pump replaced, alternator earth cable replaced (plus new alternator as misdiagnosed), throttle body replaced, MAP sensor replaced, secondary earth cable...
2002 MG TF 160 1.8i VVC - Gone
1998 MGF 1.8i VVC - Gone

Post #310229 3rd Nov 2016 11:44 am
View user's profile Send private message View poster's gallery Reply with quote
sergio977



Member Since: 08 Jan 2016
Location: Italy
Posts: 128

Italy 2007 Freelander 2 TD4 S Manual Orkney Grey

I found on ebay a "swirless" manifold for few ££: I'm not inspired yet to do this swap, maybe in next few days....IMHO it's the easiest solution Very Happy

Once you have your manifold out, I think that remove the swirl is better than blank them in place....off course you've to break them to remove



and oh: don't forget the new set of gaskets and blank the vaccum pipe

Post #310237 3rd Nov 2016 1:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Paul1966



Member Since: 21 Dec 2013
Location: Cannock
Posts: 308

England 2007 Freelander 2 TD4 XS Auto Izmir Blue

I've removed them from mine,we did it when we changed the glow plugs.I noticed one was already broken so I just took the lot out.

Post #310244 3rd Nov 2016 5:02 pm
View user's profile Send private message View poster's gallery Reply with quote
chieftiff



Member Since: 22 Apr 2016
Location: Southampton
Posts: 6

United Kingdom 2007 Freelander 2 TD4 HSE Auto Stornoway Grey

Guys, just for info I have recently changed my 07 HSE Auto to the flapless manifold. When I removed the old one the actuator was already snapped so the flaps had been flapping around for a while. I got an almost new flapless manifold off ebay from an Evoque. It had a whole set of seals in very good condition as well. If you search ebay using manifold 9659449480 you get quite a bit of choice as they are used on a few cars. I went for the Evoque as the throttle plenum is exactly the same but this can be swapped over. Anyway it is running beautifully. Also blanked the EGR ages ago with no bad side effects just a clean inlet manifold. Dave

Post #310248 3rd Nov 2016 5:32 pm
View user's profile Send private message View poster's gallery Reply with quote
sergio977



Member Since: 08 Jan 2016
Location: Italy
Posts: 128

Italy 2007 Freelander 2 TD4 S Manual Orkney Grey

Chieftiff, Paul, How did you arranged the vacuum pipe? Did you blanked it? I'm thinking to leave the actuator plugged to vacuum line but disconnected from the swirl shaft....because the manifold I've to swap don't have swirl shaft.... Neutral Smile

Post #310256 3rd Nov 2016 8:46 pm
View user's profile Send private message View poster's gallery Reply with quote
chieftiff



Member Since: 22 Apr 2016
Location: Southampton
Posts: 6

United Kingdom 2007 Freelander 2 TD4 HSE Auto Stornoway Grey

Hi Paul, I removed the vacuum actuator. Twist fit. Then refitted it to the new manifold even though it is not connected to any flaps. That way it still looks original and no blanking is required. Hope this helps. Dave

Post #310275 4th Nov 2016 8:01 am
View user's profile Send private message View poster's gallery Reply with quote
sergio977



Member Since: 08 Jan 2016
Location: Italy
Posts: 128

Italy 2007 Freelander 2 TD4 S Manual Orkney Grey

many thanks Dave, I have the same idea to proceed in that way Very Happy

maybe tomorrow I'll do this swap...but only if it will be a rainy day, otherwise I'll postpone again and I'll go out for a pic nic Laughing

Post #310278 4th Nov 2016 9:15 am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 5 of 14 <123 456 ... 121314>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site