![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Freelander2 HSE Rear Valance |
![]() ![]() |
|
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Hi,
|
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
The HSE has a standard bumper profile & what is called the "bumper cover" comes off in one piece. What you have identified is an add on to (presumably) make the HST profile. Not standard on your vehicle if it is an HSE.
|
||
![]() |
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Right, thanks Bob.
|
||
![]() |
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Will do, ta |
||
![]() |
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Right, so this is what I have removed. It's a Land Rover part, is this off a face lift HST?
|
||||||||||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4351 ![]() ![]() ![]() |
Hard to tell without a picture |
||
![]() |
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Grr.
|
||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4351 ![]() ![]() ![]() |
There was only ever 2 bodykits made for the Freelander. One for the early vehicle and one for the later vehicle. The only difference between the two was the different styling on the front bumper. As the rear bumper has never changed shape any rear bodykit skirt will fit it without an issue. The part bumper for the rear skirt that you require is LR002788.
|
||
![]() |
|
llmikeyj Member Since: 16 Apr 2016 Location: Glossop Posts: 7 ![]() ![]() ![]() |
Thanks for the info. It will take some creative fibreglass to repair, there is a chunk missing off the nearside. Might have a go.
|
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
Your photo looks like a standard rear bumper for an 07/08 car. (with black skirt and sills) They come as one piece but that lower skirt which has broken off is bonded on before assembly. I suggest you look for a replacement on the bay of fleas. It will likely need respraying but it's the most economical way to get a good looking job. Bumper change is an easy job for one person/an hour or so if you have not done it before.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
