Freelander Owl wrote:

Hi,
Is it possible to retro fit the footwell lamps on a GS, as they are not standard on my model. Also where in the footwell do the bulbs go?

Also it it possible to retro fit puddle lamps (bottom of door)?

Cheers.

Any ideas if a MY13 is wired up ready to go ?  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Footwear lights could well be there, just add bulbs.

Puddle lamps very unlikely to be there.

Slightly off topic but which bulbs can and which ones cant be swapped to LED without causing canbus errors

I've just fitted a footwell bulb to my 14 plate SE Tech. Only one mind as I couldn't find a second one.

Near Side ? FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Off side. I'll swap it to the near side tomorrow and see if it works. I could find both bulb holders, but only one bulb in the garage.

Just checked my MY13 GS and NS has bulb holder but not OS so wont bother getting a bulb in just one side  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Are you sure?
It's tucked away a bit...

I assume on the OS it sits in the (in my case empty) bracket attached to the air vent in the center between the brake and clutch pedals ? If not anyone got more news of a photo please. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

It's behind the air vent.
Next to / between the steering column and clutch pedal.
Not immediately obvious that the bulb socket is there.

you can see my OS bulb by the top of the peddles in the picture.


And the NS without bulb is the grey circle that is in the air vent top left.
.
Edit. Pictures rotated and text changed to fit the picture.



Gav.

Last edited by GSKM on 12th Mar 2016 12:43 am. Edited 2 times in total

Nor me nothing there No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Hi, just found this topic today. I was changing the pollen filter in my 07 GS today. Removed glove box tray to get access and managed to pull what I thought was a connector off of a bracket behind the tray. When I looked it was a bulb holder with bulb. But strangely it only had one cable and one connector fitted. Peeled back the foam arround it and definitely just one cable. No sign of there ever being two . I assume this would be a footwell lamp in other models. But why fit half a wiring loom and a bulb that could never work. I dont have a footwell lamp on the drivers side.

Any ideas?.

JGH99 Freelander 2 GS Stornoway Grey
Jan 2007 Bought 71,000 miles. Currently 149,300 miles.

A little tip once you locate them.
Bed in some alu duct tape (or even just foil) to the surround to give extra brightness once the bulb is inserted. FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.