Hi there I new here so go easy!

I have read some very useful posts on the fitting of detachable tow bars and various bits of good advice on same.

My questions are do Land Rover swan neck detach toeball need any cuts to the lower bumper to fit and I assume the L rover wiring kit are best to accompany same.

Thanks all enjoying site!

Enjoy the site... But please try a search, there are dozens of threads on this subject

Thanks will do

LR detachable does need a bumper cut. However, the dreaded tow bar "clunk" is still prevalent. Go Witter, or anything but Thule/Brink (branded as LR) If you want to maintain a good "departure angle" for off road use you will need a bar that requires a bumper cut.

Bob 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

Bob

Thanks for your comments s. Having done a bit of research I think the witter may be the best way to go!

Cheers

I have a Witter fixed flange bar. A bit of a reverse "battering ram" but solid and reliable. (& stops people parking too close ) Good luck with your detachable.  10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

Now think Witter or similar Fixed bar !

 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

NA1959 wrote:

Hi there I new here so go easy!

I have read some very useful posts on the fitting of detachable tow bars and various bits of good advice on same.

My questions are do Land Rover swan neck detach toeball need any cuts to the lower bumper to fit and I assume the L rover wiring kit are best to accompany same.

Thanks all enjoying site!