![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Wheels & Tyres > Odd Tyre Wear |
![]() ![]() |
|
|
Eurolandy Member Since: 09 Oct 2010 Location: Cleveleys, Lancashire Posts: 285 ![]() ![]() ![]() |
All,
|
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
Do you go round a lot of roundabouts? Past: FL2 TD4 HSE Auto
|
||
![]() |
|
Eurolandy Member Since: 09 Oct 2010 Location: Cleveleys, Lancashire Posts: 285 ![]() ![]() ![]() |
Strangely enough, I do. Gone:
|
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
Well there's your answer then! Past: FL2 TD4 HSE Auto
|
||
![]() |
|
Eurolandy Member Since: 09 Oct 2010 Location: Cleveleys, Lancashire Posts: 285 ![]() ![]() ![]() |
Scientific conclusion to the issue then!
|
||
![]() |
|
Stevie5tapes Member Since: 10 Jun 2012 Location: Brighouse, YORKSHIRE Posts: 1370 ![]() ![]() ![]() |
My front near side tyre has worn around the edge by about 2 cm, I checked the tread depth and it's at 3 MM., rest of the tyre is 7mm. I went to my local independent tyre place and they said that it was due to roundabouts, they didn't think the tracking needed checking at all. Black MY2013 SD4 GS Auto, Wood Company Armrest, Freel2 sticker.
|
||
![]() |
|
Landiroamer Member Since: 30 Apr 2015 Location: Devon Posts: 1185 ![]() ![]() ![]() |
Maybe an occasional trip to France is in order so you go round them the other way to even the wear out in future, on one of those booze cruises? |
||
![]() |
|
mattie Member Since: 13 Sep 2015 Location: bath Posts: 8 ![]() ![]() ![]() |
Not sure if people are being serious - I've also noted a lot more wear on the outer edges of my 57 FL2, was worried that the age of the car was catching up with it and the alignment was going. I popped onto the forum to ask what the cause might be, and I must say I didn't expect the answer to be 'roundabouts'.
|
||
![]() |
|
Andy131 Member Since: 09 Dec 2009 Location: Manchester Posts: 2187 ![]() ![]() |
Hi Mattie
|
||
![]() |
|
Mikey Member Since: 07 Jun 2008 Location: Dundee Posts: 785 ![]() ![]() ![]() |
Same issue with our FL2. As it drives so well, corners and roundabouts are taken more quickly than they would be compared to our Disco 3.
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5148 ![]() ![]() ![]() |
I think you'd have to do a lot of high speed roundabouts to get wear on the left rear and not the right rear tyre. Maybe the OP does lives in an area of high roundabout density. I dont and get uneven wear only on the outer edges of the fronts. Jules |
||
![]() |
|
Jack frost Member Since: 21 Dec 2011 Location: UK Posts: 796 ![]() ![]() |
I am on my 3rd FL2 & all three cars wore the front near side tyre unevenly (outer edge) |
||
![]() |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 ![]() ![]() |
Wear on one side only is pretty unusual in my experience, and wear on one side of the rear is a new one on me. If we assume that the car has not been in a serious accident and badly repaired (the obvious answer), my next thought would be that the wheels had been swapped from front off to rear near side, and that the original wear had been to the outside of both front wheels. This would not need to have happened recently. I suppose it's also possible if the tracking is a bit out that you would steer to the right to counter road camber, and that might wear the front near side, but not the rear. Apart from that I'm stumped.
|
||
![]() |
|
mattie Member Since: 13 Sep 2015 Location: bath Posts: 8 ![]() ![]() ![]() |
I've contacted our local Land Rover specialist to see if I should get it checked before I get new tyres fitted. I'll replay any feedback.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)