Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > REAR BUMPER REMOVAL SCHEMATIC |
|
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 |
Maybe you need an LR Torch mate to find it
|
||
13th Jul 2015 11:18 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Cool, that's exactly what I was after! Thxs
|
||
13th Jul 2015 11:28 am |
|
MidlandRover Member Since: 30 Jun 2013 Location: Derby Posts: 496 |
Scottish humour?. FL2 SD4 Metropolis Auto Santorini Black / ivory completely stock.
|
||
13th Jul 2015 11:42 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
So from what I can see the same three fixing points for the rear Mudflaps are all that holding the bar on
|
||
13th Jul 2015 11:42 am |
|
ReggiePerrin Member Since: 13 Mar 2013 Location: Derbyshire Posts: 1279 |
Bumper off and on is really easy... 15 minutes each way and once off the towbar & electrics are also child's play. Afterwards, you'd never know the bumper cover had been off.
|
||
13th Jul 2015 4:26 pm |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 495 |
there are 2 screws that hold the wheel arch liner underneath one each side,near the tyre, also a plastic type push in clip about the middle at the back,i forget what they call these clips,there might be 2 more screws which are obvious ,I cant remember,but the ones under neath nobody seems to mention,then bend back liners and they will hold back on the tyres.2 bolts behind lamps,also remove tread plate and scrivits under neath,lamps need plastic lever to prise out of clips on out side of lamp you can find more on other forums if necessary,the bumper is also held by clips both outer edges,at the top get some one to hold it while you pull on ends away from ns and os from the sides.dont forget the parking sensor connector on the os :)oh and about 5 screws at the back underneath. |
||
22nd Jul 2015 11:59 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Hi,
|
||
23rd Jul 2015 4:45 am |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 |
As you bought the car new why didnt you just get the dealers to fit it? MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
|
||
23rd Jul 2015 6:40 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Didn't think about it at the time. MY15
|
||
23rd Jul 2015 7:36 am |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 495 |
2 screws below these bolts that go up from under neath,as I mentioned there is a forum somewhere that has an exploded diagram |
||
23rd Jul 2015 9:23 pm |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 495 |
cost also comes into it I suppose |
||
23rd Jul 2015 9:25 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Your mean the 2 that hold the Mudflaps on? MY15
|
||
24th Jul 2015 12:41 am |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 495 |
mine hasn't got mud flaps,but those I suppose,plus 2 screws going up directly behind the wheel.ive just found the instructions you need on this forum,go into home page,then general,then search how to remove rear bumper its got a thread on this and a lr web address just click on this its a really good diagram |
||
24th Jul 2015 11:50 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis