![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > Blanking EGR '62 Plate |
![]() ![]() |
|
|
Spatch Member Since: 20 Feb 2015 Location: Kent Posts: 170 ![]() ![]() |
Thanks for all the replies. I had a V6 CDTi Vectra some years ago and this would flag up problems if the EGR was blanked. However, I found that putting a small hole in the blanking plate, to allow some exhaust through but to restrict the rest worked.
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
The EGR system should be inactive until normal operating temperature is reached so I don't think that is correct! |
||
![]() |
|
RichP Member Since: 21 Sep 2014 Location: Worcestershire Posts: 1369 ![]() ![]() ![]() |
I am not sure that is the case as people say that the engine warms up quicker without the EGR blanking, so it must have some effect at lower temperatures. |
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
ok! Here's an exert from an article on the EGR operation. If the Freelander system operated differently then I'd be interested to know or if someone can point me in the right direction of a LR technical operations bulletin.
|
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 ![]() |
Indeed, at idle the EGR will not open until operating temperature. And even then, after a while the ECU will close the EGR.
|
||
![]() |
|
RichP Member Since: 21 Sep 2014 Location: Worcestershire Posts: 1369 ![]() ![]() ![]() |
Well, you've convinced me |
||
![]() |
|
Spatch Member Since: 20 Feb 2015 Location: Kent Posts: 170 ![]() ![]() |
Alex, you obviously know your stuff. Please would you advise the following:
|
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 ![]() |
If the proper operation is restored, it may clear after a few cycles of driving.
|
||
![]() |
|
Spatch Member Since: 20 Feb 2015 Location: Kent Posts: 170 ![]() ![]() |
Thanks Alex. Do you know if it goes into limp home or is it just a light?
|
||
![]() |
|
fredastaire Member Since: 03 Dec 2012 Location: Holbrook Posts: 721 ![]() ![]() ![]() |
Hi Spatch, please can you update your profile; we don't know any details if your Freelie ie year and model.
|
||
![]() |
|
Spatch Member Since: 20 Feb 2015 Location: Kent Posts: 170 ![]() ![]() |
Profile updated.
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Thxs Alex, not that I'm being hard to convince just trying to understand the reasons for doing so.
|
||
![]() |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 ![]() ![]() |
Stuartc: I think Alex drives an older model than yours. As he wrote earlier, the older models can be blanked.
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Thxs Past Master. I'm a believer of "if it ain't broke, don't touch it" school but there seems to be a lot of talk about the EGR and how it can make a nasty mess of your intake manifold and it would seem the type of trips that i'm doing make mine a prime candidate.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
