![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Creaking / Squeaking Noise From NS Front Over Bumps (SOLVED) |
![]() ![]() |
|
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
The air intake on the wing has a single screw that has been loose in the past.
|
||
![]() |
|
mattnm32 Member Since: 31 Jan 2014 Location: Northants Posts: 51 ![]() ![]() ![]() |
Thanks for that, just had a look through it but those guys seemed to be describing it as a rattle, which this really isn't, this sounds like a really squeeky old mattress |
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
I wouldn't know |
||
![]() |
|
pjbnet Member Since: 03 Mar 2008 Location: UK Posts: 127 ![]() ![]() |
Matt,
|
||
![]() |
|
mattnm32 Member Since: 31 Jan 2014 Location: Northants Posts: 51 ![]() ![]() ![]() |
Is that possible? just being a cold thing,as mad as that sounds, it has never done it before and only did it this weekend when it was registering -2 outside?
|
||
![]() |
|
mattnm32 Member Since: 31 Jan 2014 Location: Northants Posts: 51 ![]() ![]() ![]() |
Evening guys, just to update on this, I had the garage look at the car and they found a bush that looked like it had seen better days in the ns lower arm. They replaced this today and road tested it and all was fine.
|
||
![]() |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 ![]() ![]() |
Grease may be a bad idea if you have any rubber parts. A spray of WD40 is cheap and will do no harm. Ex AA Series III LWB Safari - Gone
|
||
![]() |
|
wurzel153 Member Since: 18 Dec 2011 Location: Gloucestershire Posts: 301 ![]() ![]() |
You can get creaking from the base of the A pillar, when it gets colder 2 metal parts begin to rub causing a creak, some louder than others. When it's warmer the parts expand and don't rub. Land Rover are aware and have issued a fix where they insert a long screw driver up into the A pillar to prise the panels apart.
|
||
![]() |
|
Offshore1987 Member Since: 11 May 2014 Location: Hampshire Posts: 496 ![]() ![]() ![]() |
Would of thought it would be worth cheeking the front suspension? LR008025
|
||
![]() |
|
mattnm32 Member Since: 31 Jan 2014 Location: Northants Posts: 51 ![]() ![]() ![]() |
Just been out with the other half driving so I could have a listen to where this noise is coming from. I actually think from sitting in passenger seat that its coming from higher up around the bulkhead area. I'm going to strip the plastic covers off from around the bottom of the screen in a minute and see if anything is loose etc around the wiper motor area? |
||
![]() |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2621 ![]() ![]() |
Have rock of the battery see if it's loose at all,I know what you mean rattles and squeakes drive me mad. |
||
![]() |
|
mattnm32 Member Since: 31 Jan 2014 Location: Northants Posts: 51 ![]() ![]() ![]() |
Right, I've been out and had a fiddle around with it, checked battery, that's all good, lubricated bonnet hinges as I read another thread saying that had caused a squeaking sound and visually checked everything I could see and get my hands on. I also removed the glovebox and checked everything up behind there.
|
||
![]() |
|
RichP Member Since: 21 Sep 2014 Location: Worcestershire Posts: 1369 ![]() ![]() ![]() |
I fixed mine with the knob on the dash board, the one marked 'volume' |
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
I presume you have checked the possible loose bolt behind the wing intake grille (repeater indicator). A known rattle source. 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
