Did mine this morning too

Didn't reseal it Gtechniq last 8 months

Though I did used my Wolfs Chemicals rim Sheild on the wheels Former Mod/Member, with the most post & Chicken George Arch nemesis

My son's FL2 this morning, you should see the outside. I am thinking of giving him a doormat for when he gets out of the car to keep the drive clean.

What a great looking car! Well done the geezers and gals who penned the lines of the Freely2.
Sad to say can't work up much enthusiasm for the DS bling box.

Some who should have a car with rubber doors has dented my car and disappeared, ignorant gits some people.



So a quick call to my mate and he pops round with his box of tricks and all is well, amazing what you can do with a hot melt glue gun, some plastic pads and a little skill

Well that's a bummer ......

.... but what a great repair.

Got no idea that repair you described was available, what's the process and what's it called. FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

the Dent magic.dent repair firms around here all use similar
load on showing how.

the One in exeter http://dentrepairservice.co.uk/ did a couple on a Subaru I owned
he was 1st class, totally invisible like Tazs above.
Glad they repaired it for you I would be s Peev'd to find that.

He has his own business and services the local garages with his Paintless Dent Removal, he thought the inside of the wing was double skinned and decided to do the work externally.

It involved prepping the surface, ie stripping any wax off, he then applied hot melt glue to a plastic pad device and stuck it too the dent, allowed the glue to harden, attached a "pulling device" to the plastic pad and gently pumped the device then pulled off the plastic pad to have a look, a few taps with a wooden rod to flatten any high spots and voila!

He did point out that if the panel had been sprayed there is a chance that the paint will come off

He says there is still a tiny crease but I'll be blowed if I can find it, so I applied a couple of coats of Jett and she's as good as new.

That looks great results from a simple method, only every seen it were they weld on to the panel, not glue

 Former Mod/Member, with the most post & Chicken George Arch nemesis

I still think Taz doctors his photos! No cars that shiny!!  2013 Dynamic Santorini black
2011 XS Lago grey
2007 HLS Stornoway grey
sometimes towing an Elldis AVANTE 574.

It gets washed the start of each Watch  p****d off with a Digital Keyboard Warrior

http://www.cardazzle.co.uk/cherry-snow-foam-80-p.asp

Click image to enlarge

Click image to enlarge

Pugh, Pugh, Barney McGrew, Cuthbert, Dibble, Grub have done a fine job  p****d off with a Digital Keyboard Warrior

Summer wheels and tyres back on yesterday, good wash and dry, well an 8 mile drive home to blow the water off.
Werkstat prime and a coat of Werkstat Jett and today it rains

Need to get a 'big' rear number plate, that will get changed soon as i have a little mod to do at the rear

Click image to enlarge

Liking the nice clean FL2 oh and the summer wheels

Need to get mine cleaned, it's covered in salt from snow when I was coming over Glencoe on Tuesday and it's covered in mud from yesterday's biking in the North York Moors.
But my Nilfisk pressure washer is kaput!

A couple of weeks in Devon and a few pics for you.

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge