Does anyone know the exact part number of the circled place? It's a LHD model satin silver bezel.

PS: the part number should be like LR0082XX

PPS: I just know the RHD model's part number is LR008256

Click image to enlarge

Don't know if this helps but the whole kit, which contains all the aluminium trim including above the glove box, trims either side of the steering wheel and the trim around the gear stick for LHD is LR005036. I can't find an individual part? I use this site. http://lrparts.net.ru It shows the RHD version as LR002463

Phone a dealer  MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Thank you RichP. Actually that's not what i want. What you said are some kind of dash trim that are stuck to the original panel, instead of inserting. Still thank you!

LR NUT wrote:

Phone a dealer

I tried twice. One said i have to order a whole set bezels, which cost $200. That's ridiculous;
Another dealer sent me a wrong one and said that's what i want and refuse to return.

part number Satin silver LR008254 from (v)9H000001 to (v)AH215700

Also needs an interior valetor!
Sorry, couldn't resist. I'm OCD about cleanliness  * GONE. GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* GONE.2012 RR Sport HSE SDV6 Orkney Grey. Rocket ship. 33mpg.
* Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

I would hazard a guess that it looks like a fire damaged car, seen interiors look like that from the aftermath of a fire from the smoke, Is the OP repairing it?

Paul1966 wrote:

part number Satin silver LR008254 from (v)9H000001 to (v)AH215700

DrRpb wrote:

Also needs an interior valetor!
Sorry, couldn't resist. I'm OCD about cleanliness

I'm OCD too. It's not my car, i found the img from interent.

taztastic wrote:

I would hazard a guess that it looks like a fire damaged car, seen interiors look like that from the aftermath of a fire from the smoke, Is the OP repairing it?

It's not my car, i found the img from internet.

I can't believe you are looking for this too!

I've spent the last week looking at part numbers trying to figure out what the satin silver LHD is for the part you were seeking (LR008254) and the two other matching parts for the trim. I can't find anything that lists part numbers for LHD and I've already made the mistake of ordering RHD.

Million dollar question(s):

Does anyone know the part number for the satin silver piece that goes on the glovebox (also in the picture above, but on the far right) for LHD?

Does anyone know the part number of the satin silver piece that goes to the left of the steering wheel on LHD cars (where the dimmer and odd change holder thing is)? I'm talking about this piece right next to the wheel (ignore the arrows): http://i.ebayimg.com/00/s/NjQwWDk2MA==/z/2gwAAOSwzrxUtNp1/.JPG


Any help is greatly appreciated!

I have a 2014 LR2, but I swear they never made any in LHD that were satin silver but it looks like the 2010 trim works for them.

LR008248 and LR001909.
If this link works this where you will find the part numbers.
http://lrparts.ru

Thank you so much! That link works, but I can't read a thing on it :/

Last edited by bobby23 on 27th Jan 2015 12:33 pm. Edited 1 time in total

So, LR001909 is the right shape and piece but the veneer seems to have this odd dot matrix like pattern to it instead of the normal satin silver finish that matches the rest of the car (glove box LR008248 and small piece LR008254 ). Any idea why the finish is different on this one part? I'm assuming this is because this part is "metallic" and the others are "satin silver"..why must this be soo complicated

Example:
http://www.lrisolutions.co.uk/media/catalo...g_7221.jpg

I don't know if this is because LR001909 may be an older part number? It seems like LR001909 has been replaced by LR007296? On brit-car LR001909 and LR007296 are linked but I'm not entirely sure what that even means: http://www.brit-car.co.uk/product.php/3364..._dash_pane

It seems like there are almost 3 types of finish, satin silver, metallic, and metal wave veener. I feel like metal wave veneer may be the best match for a 2013-2015 interior. I can find metal wave veener parts but all the diagrams show a RHD despite calling it an LR2 (which I thought was US):

Example (meta wave veneer):

Switch: LR022109
Glove Box Thing: LR022177
Small part to right of wheel: LR022183

Is there any way to tell if these are LHD parts? I feel like the diagrams are always RHD. Any way to tell based on part number alone?

Thanks again for any help!

Last edited by bobby23 on 27th Jan 2015 12:54 pm. Edited 1 time in total