Hello

Can anybody tell me how I re-set the memory of the drivers seatin my 2008 hse please

Front seats
12
DRIVING POSITION MEMORY
Once you have adjusted the power operated
driver's seat and exterior mirrors (see 33,
ELECTRIC EXTERIOR MIRRORS) the vehicle
can memorise these settings for future use.
1. Press the memory store (M) button to
activate the memory function.
2. Press one of the preset buttons within 5
seconds to memorise the current settings.
MEMORY (1, 2 or 3) SETTINGS SAVED will
be displayed on the message centre,
accompanied by an audible chime to
confirm the settings have been
memorised.
3. To recall a stored position press the
relevant preset button. MEMORY (1, 2 OR
3) RECALLED will be displayed in the
message centre.
A seat position will only be memorised during
the 5 second active period.
Any existing settings will be over-written when
programming a memory position

Wizking's advice is good as far as it goes. However, if you set up the seat and the mirror then lock the car and come to it again with the other key fob the seat will not go to the memorised position.

You have to set memory using both key fobs, one after the other. Seems daft but that's the way it works

I just copied from the handbook, strange they don't mention the fobs!!

Heard about the fobs allegedly remembering the seat positions but it didn't on either of the two Freelanders I had, nor on the D4, Mrs Ad has one fob, I have the other, if one of us has been driving, the next one to drive has to press the allocated number.

http://www.freel2.com/forum/topic9233.html

Try his link