Picked up a brand new 20" v spoke evoque alloy with a brand new tyre which I will be using as a spare for my Freelander. I have searched google but cannot seem to find much about the tyre pressures for the 20" alloy, one post I read was 39 psi if the car will be traveling 100mph plus

My dynamic will come with the 19" diamond turned alloys what pressure should these be at ? MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

When I was running 20s on my d3 I used to put 38lb in the back and 36lb in the fronts
Maybe a guide to work from
Dunc

Thanks I was guessing 36psi all round but may be wrong. The disco has more air in the rear incase you are carrying heavy loads or extra passengers. Im only wanting to know the 20" spare alloy as once I have inflated it to the correct air pressure I will leave it sitting and only check it before I pop it in the boot. If it hasn't leaked any air then it will be left in the boot and forgotten about (yearly check). Once I pick the car up I will find out by the handbook what my 19" psi should be ...... MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

36psi all round for me. No issues, normal load and towing.

The 19's ran 35psi, so I run 36psi all round. Freelander 2 HSE Lux 2013MY - Barolo Black with Ivory Leather. Alpine DVD - Privacy -Evoque 20" Dynamic Wheels and more to come.........

My hunch was correct 36psi it is cheers MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s