Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Command shift - red-lining it ? |
|
|
mjb Member Since: 30 Aug 2007 Location: Hessen Posts: 47 |
Yeah, the command shift doesn't actually change gear, it askes the computer if it will change gear. The computer thinks about it and then either sends the command or not. If the requested change will push the RPM's outside the acceptable band (either above or below) it will dissallow it. Likewise, if the RPM's extend beyond the acceptable band the computer will change anyway, as you've found. - Mike |
||
2nd May 2008 8:40 am |
|
Matei Member Since: 07 Feb 2008 Location: Galati Posts: 782 |
What you mean is that you cannot practically drive in the gear you want? What I mean is that if you want to use the third gear instead of the fourth because for some reason you consider it best , if the rev are enough for the fourth gear the computer will change it regardless if you want or not ? Sorry if my question is stupid by I have allways driven only manual FREELANDER 2 TD4 SE (XS UK) IZMIR BLUE SIDE STEPS COLD PACK BI-XENON TINTED WINDOWS - AND PROUD OF HER |
||
2nd May 2008 8:53 am |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
Basically if you was in 4th and wanted to use 3rd, if the revs were going to be redlined the car wouldn't let you go into that gear until the engine revs had slowed to make it safe.
|
||
2nd May 2008 9:06 am |
|
Gambba Member Since: 07 Aug 2007 Location: Dubai Posts: 775 |
Command shift holds the gears longer than if you have it in Auto sport or standrad auto, but at some point it decides it's time to shift.
|
||
3rd May 2008 8:40 am |
|
Tim in Scotland Member Since: 12 Mar 2006 Location: All at sea Posts: 875 |
It knows that you don't want to intentionally blow up the engine so it saves it from being blasted in a million bits for you by changing up a gear!
|
||
3rd May 2008 9:45 am |
|
Gambba Member Since: 07 Aug 2007 Location: Dubai Posts: 775 |
Not sure that's the reason because this it is the job of a rev limiter to protect the engine from blasting into a million bits, what it does do though is it prevents a sudden end to power gain when it hits the rev limiter, which can be unwelcome. The system does the perfect job, which means I rarely use auto.......what it doesn't allow for is when you forget to shift down to first at a junction and then try and slowly pull off in second instead! |
||
4th May 2008 8:28 am |
|
mjb Member Since: 30 Aug 2007 Location: Hessen Posts: 47 |
Or stay in D and select "Sand" mode and floor it, this really lets rip. Amazing! Its like a totally different car. - Mike |
||
5th May 2008 7:35 am |
|
Matei Member Since: 07 Feb 2008 Location: Galati Posts: 782 |
I like this part especially "DON'T TRY THIS IF YOUR FREELANDER2 HAS A MANUAL GEARBOX............................... " Guess this is the reason why the FL2 on auto is quicker than the manual on the 0-60 miles sprint. Not long ago there was no auto that could do this to a manual. Technology has evolved so much FREELANDER 2 TD4 SE (XS UK) IZMIR BLUE SIDE STEPS COLD PACK BI-XENON TINTED WINDOWS - AND PROUD OF HER |
||
5th May 2008 7:49 am |
|
Gambba Member Since: 07 Aug 2007 Location: Dubai Posts: 775 |
I thought this was the case, but it doesn't seem to be when you floor it, and appears maybe CommandShift allows and extra 100rpm before shifting compared to Auto and Sport Auto. |
||
6th May 2008 6:16 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13291 |
So is command shift the same as the manual option on my dads E320 Merc where you can nudge the stick left or right to change gears but it will revert to auto again if it decides you really should have changed gear by now? At work
|
||
6th May 2008 7:34 pm |
|
Gambba Member Since: 07 Aug 2007 Location: Dubai Posts: 775 |
Kind of but not...... It does not so much revert as you still remain in CommandShift mode. CommandShift always allows you always to get up to the redline (or close to), so never shifts automatically lower than 6400 rpm (on the i6) unlike in auto mode where if it sees you have been in a gear for a long time in the higher rev range then it will decide to shift up automatically. Sport auto mode is quicker to downshift a couple of cogs giving quicker acceleration and is more reactive to the positioon of the gas pedal in terms of shifting up or down. |
||
7th May 2008 4:34 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis