![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > diesel fuel addtitive on next fill up |
![]() ![]() |
|
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
considering the MOT smoke test mine just recently managed to pass eventually, I was thinking of adding something on the next fill up to give the system a bit of a clean out.
|
||
![]() |
|
IanH Member Since: 22 Feb 2012 Location: Stirling Posts: 137 ![]() ![]() ![]() |
Two Stoke Oil! My wife's previous FL2 (MY10) was always a bit smokey on start up first thing in the morning. 2SO cured it! |
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
Speaking as an MOT tester. I'd say a good thrashing on the way to the test station will give the exhaust a good clear out. Nine times out of ten we have to give the car a good few revs before taking it in the workshop otherwise it fills the shop up with smoke/soot. Once cleared, they fly through. |
||
![]() |
|
fredastaire Member Since: 03 Dec 2012 Location: Holbrook Posts: 721 ![]() ![]() ![]() |
I recommend that you check out the post started by Yamahafan on the forum, it will detail the correct two stroke for your car which doesn't have a DPF (diesel particulate filter); mix ratio is 330ml per tank fill. <cars with DPF need a different spec 2SO
|
||
![]() |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2609 ![]() ![]() |
I use Redex Diesel never had a problem with mot or smoke. |
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
thanks guys, I'll need to spend some time reading through the 2 stroke oil debate
|
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
Hi Atrix, it did pass eventually, but not without a lot of excessive revving ( in my opinion ) I would like to be a bit better prepared the next time !! Iain |
||
![]() |
|
Atrix Member Since: 26 Jan 2010 Location: RIGA Posts: 83 ![]() ![]() ![]() |
Iain, the same was true for me. Only with the 4th attempt the tester reached the allowed limit of 1,5. First revving attempts produced measurments between 5 and 3 |
||
![]() |
|
StuckInTheMud Member Since: 02 Apr 2013 Location: Ayrshire Posts: 113 ![]() ![]() ![]() |
Hi,
|
||
![]() |
|
chrisr1806 Member Since: 20 Oct 2012 Location: None Posts: 2220 ![]() ![]() ![]() |
I use it too, never had any problems. ![]() Nice to see you posting again Pablo. ![]() |
||
![]() |
|
Atrix Member Since: 26 Jan 2010 Location: RIGA Posts: 83 ![]() ![]() ![]() |
If I am not mistaken, the smoke test rules require that the engine temperature has to be at least 80 degrees centigrade in order to start the test.. |
||
![]() |
|
StuckInTheMud Member Since: 02 Apr 2013 Location: Ayrshire Posts: 113 ![]() ![]() ![]() |
Yeah, Hi Chris,
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)