I start this thread as a place to add pictures of our new dyno when it arrives, once the "cell" is painted and all the fans are in ill add a few pictures of those also.


2013 will be a fun year for developement now we dont have to travel every time we need a dyno for calibration work.

EDIT, a few pictures added of the fans.

This first is a 630mm fan for some added extraction is I want the shutter closed.



External fan vent system I made for it which can be opend and closed from inside once finished.



Another 630mm fan to bring in some cold clean air from outside, stop the room heating up tp much. It will also direct cold air into my main large fan.



This is another vent set I made for that one.



This fan is the big one that will be infront of the car, its a fan I had made specially which is 1000mm diamiter and is rated at 20,000cfm. This is it when loaded in the back on my T5 transporter van, as you see not much space left lol.



Here its on the floor with a 1 gallon paint tin next to it for scaling.




This the Dyno main power outlet, front rollers Eddy current brake retarders 32A, Rear rollers Eddy current brake retarders 32A and a 16A for the PC elextronics.



This is for the bed adjust motor to change the wheelbase of the dyno.




Pete

So you really do have "wind" Pete?

is the rolling road all four wheels?

Hi
Yes im all full of wind now lol.

It is a 4WD dyno yes, full Eddy current dyno with speed and load control for steady state tunning etc etc. a few pictures here. http://www.defender2.net/forum/topic18278.html


Pete