Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > DPF removal kit |
|
|
ratbone Member Since: 30 Oct 2011 Location: Arendal Posts: 21 |
Does anyone knows where to buy a DPF removal kit on the internet ?
|
||
14th Jun 2012 7:12 pm |
|
JST Member Since: 01 Nov 2011 Location: Lizant Posts: 1098 |
I have not had it done and my FL2 does not have one! However, my wife's Peugeot does have one and should it ever give trouble it will be removed. I looked at this company's website:-
|
||
15th Jun 2012 8:56 am |
|
Atrix Member Since: 26 Jan 2010 Location: RIGA Posts: 83 |
I dared remove the DPF from my FL2 one year ago after endless trobules and unwillingness on the part of JLR to recognise it as a recurrent problem. I did it with the help of a DPF-emulator kit produced by an Italian company and DPF-replacement pipe. But it did not went without problems. I would like to emphasize that unprofessional fiddling with DPF would not produce the desired result but bring about new fault messages and 'reduced engine performance' mode, because you have to cheat the ECU not only with regard to pressure difference but also milage limitation (the ECU demands a DPF-regeneration approx. every 850 km driven) and the number of 'cold-engine' starts done. After removal of DPF error-messages popped up regularly. Nevertheless the car didn't go into the limp mode. Presently the recurrence of fault messages went done considerably and I am happy that I succedded in removing this piece of s t. The pecularity of this DPF-Emulator-Kit was that, upon installing it the garage had to do 'new DPF fitting' procedure through OBDII port with a JLR-tester. The same procedure is needed if you disconnect the car battery. I had also no problems to pass the MOT without DPF. The costs: DPF-Emulator-Box around 550 Euros, replacement pipe 300, installation in a garage with JLR testter - also around 300 Euros.
|
||
15th Jun 2012 10:56 am |
|
ratbone Member Since: 30 Oct 2011 Location: Arendal Posts: 21 |
Thanks for warnings, i understand that this is not a straight forward job.
|
||
15th Jun 2012 7:38 pm |
|
Atrix Member Since: 26 Jan 2010 Location: RIGA Posts: 83 |
To get my hands on the ECU software designed for Freelanders without DPF that what I tried through several JLR service stations in Germany, but everywhere I had to walk out empty-handed. The reason was that JLR refuses to give the software to a garage for DPF-affected cars and would do so only for Freelanders originally built without DPF. In continental Europe, these were the first Freelanders produced in 2006 and If I am not mistaken in the beginning of 2007. I suppose that such attitude was caused by fear that by handing out the software JLR would implicitly acknowledge the problem of ill-constructed exhaust gas treatment system. Basically, the car meant to cross the continents as the JLR advertises gets stuck due to going into limp mode in the city or in off-road terrain, where you can't comply with the imposed silly DPF maintenance protocol, meaning, keeping the engine above 2500 rpm for 20 minutes without interruption. I don't even want to mention that ECO-mode driving / switching the gears up in accordance with display message, which was also one widely advertised feature is totally not compatible with DPF maintenance, because you have to swith into a higer gear long before 2500 Rpm, that are a minimum required to keep the DPF clean. The problem is aggravated by low outside temperatures due to the fact that the engine needs to reach a certain temperature before it can start a DPF regeneration. It does not bode well for countries having cold winters.
|
||
15th Jun 2012 8:32 pm |
|
ratbone Member Since: 30 Oct 2011 Location: Arendal Posts: 21 |
Thanks for good answer, can someone that have seen or done that new DPF technical bulletin confirm that it helps ?
|
||
15th Jun 2012 9:09 pm |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 |
This has come up before.
|
||
15th Jun 2012 9:21 pm |
|
bigalf1961 Member Since: 14 Mar 2011 Location: manchester Posts: 846 |
hi i should tell you in the hand book how to maintain the dpf there is a device on the market witch plus into the diagnostic port on the car and forces a dpf re=gen its made by a company in the north of the uk dont know of anybody on here buying one but i think it cost approx £140 plus vat it may be a better option for you as for the engine oil in your freelander its of low ash speck you must use this type of oil in your engine (dont use ordinary type engine oil for diesels as this will cause the dpf to block) as for fuel i use supermarket brand and do a 26 mile round trip to work on 30 mph roads and dont have any problems with the dpf blocking up and have you had the latest software up grade for the system hope this helps you rainy-city
|
||
16th Jun 2012 7:24 am |
|
ratbone Member Since: 30 Oct 2011 Location: Arendal Posts: 21 |
Hello again, i have read the handbook and the engine oil i use is what LR recomend, cause last time i used a LR workshop for oil changing.
|
||
16th Jun 2012 8:12 am |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 |
That is the point I made above. There is less of a problem in the UK as older models do not have DPF. It may be that a software update will help you. Do not trust the Land Rover agent to put the correct oil in the car! What did they use? Oil must be C1 type, but Landrover did not specify this for earlier cars with DPF. See http://www.freel2.com/forum/topic11835.htm...cification |
||
16th Jun 2012 1:52 pm |
|
Big Dave Member Since: 22 Nov 2009 Location: Yorkshire Posts: 1055 |
LR Experience take you on the road before the off road part(all 4 I've been on they have) and that will be enough to burn the soot off in the DPF.
|
||
16th Jun 2012 2:19 pm |
|
bbjoca Member Since: 25 Dec 2011 Location: Stockholm Posts: 64 |
Doesn't removing of the DPF warrant for a re-typing of the car in Norway? I am pretty sure it would do so in Sweden...
|
||
16th Jun 2012 4:33 pm |
|
Tigger Member Since: 30 Mar 2011 Location: L15KRD Posts: 2555 |
In all this talk of removing the DPF, can we just remember what a vital job it does in keeping really nasty diesel particulates from entering the atmosphere? |
||
16th Jun 2012 4:40 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13291 |
no its a stupid over-reactionary device, used before it is perfected..the end At work
|
||
16th Jun 2012 4:49 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis