![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Sd4 reversing |
![]() ![]() |
|
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 ![]() ![]() |
Never noticed it to be honest, don't have a problem with it, used to I expect, haven't had a pitch yet that has been difficult to reverse the van on to |
||
![]() |
|
Big Dave Member Since: 22 Nov 2009 Location: Yorkshire Posts: 1055 ![]() ![]() ![]() |
An overlay of the Torque graphs on the SD4 and TD4 will show if there is a lack of low down torque (as the symptoms suggest) on the SD4 compared to the TD4. If not, maybe new cars that aren't run in/at their best? Mine: 2012 Golf GTI Edition 35
|
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
Must admit, mine needs a decent amount of revs to get it to shift, I dont tow so have no experience there, at home if I park out front on the kerb, driving on gently is fine it will pull itself up the kerb, in reverse it needs plent y of revs and gently too, otherwise it rises up the kerb and its off like a bolt.
|
||
![]() |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20092 ![]() ![]() |
Sounds like the exact thing I got, might get used to it eventually |
||
![]() |
|
Missing Link Member Since: 25 Aug 2010 Location: Essex Posts: 138 ![]() ![]() ![]() |
Jumping up a kerb in reverse is quite normal for a front wheel drive car. When driven wheels are against the kerb it will have a lifting action rather than just moving forwards. The non-driven wheels are being pushed from the other end of the car and lack that lift action so don't rise over the kerb so well requiring more push to get up the kerb and so too much power when over it. I have seen front wheel drive cars spin up when trying to reverse up a high kerb yet rise OK forwards
|
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
The guy at Halewood was demonstrating the Freelander and saying many people simply think its stuck or unable to get past an obstacle, something happens at around 1800 rpm, I think, where it will start to move, below this speed and it will just sit there revving and no moving? May be something similiar long on here? |
||
![]() |
|
EYorkshire Member Since: 18 Nov 2010 Location: (!) Posts: 4392 ![]() |
I can't compare but my reversing hasn't given rise to a problem |
||
![]() |
|
simont Member Since: 15 Feb 2011 Location: Sunderland/Newcastle Posts: 1809 ![]() ![]() ![]() |
If that's what gets you excited - don't forget the cleaning products ![]() 2002 Toyota Celica 140 Silver (mid life crisis - again!) 2007 FL2 GS Manual Army Reconnaissance Green + freel2.com sticker ![]() 2004 Toyota Celica 140 Black - Gone 2000 Toyota Celica 140 Silver - Gone 1998 Toyota Celica ST Pearl Green - Gone 1996 Nissan Primera 1.6 - Gone 1994 Rover Montego 1.6 Auto - Gone |
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
maybe just relevant to the auto ?
|
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
Quite probable Iain, the manual, with the clutch lifted has to put the torque through the wheels, or stall and I believe there is a device to prevent that, in the auto, the torque convertor happily absorbs it and the car just sits there.
|
||
![]() |
|
SamYPKP Member Since: 26 Mar 2011 Location: London Posts: 77 ![]() ![]() |
We are used to it now, and have never had a problem with reversing - although the trickiest type of reversing for us is parking bum in first.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)