![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > AIR CON PROBLEMS WITH AUDIO |
![]() ![]() |
|
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20092 ![]() ![]() |
possible short on one of the wires going to that speaker |
||
![]() |
|
garyd Member Since: 04 Jan 2011 Location: North Essex Posts: 44 ![]() ![]() ![]() |
Sometimes when i have the FM radio on and switch the air-con on i get interference.
|
||
![]() |
|
Pegleg Member Since: 15 Apr 2010 Location: Deep in mid Wales Posts: 3114 ![]() ![]() ![]() |
Can't see this having anything to do with air conn. The additional electrical load when this is switched on is the compressor clutch solenoid (very low current) and the cooling fans (high current). Due to the increased load, the only noise you should hear, if any, is the alternator 'whine' due to increased ac voltage ripple every 120 degrees of alternator rotation. In any case most of this is inaudable on FL2. If you could hear it, it would be heard through all the speakers as a whine, not a 'crackle'.
|
||
![]() |
|
garyd Member Since: 04 Jan 2011 Location: North Essex Posts: 44 ![]() ![]() ![]() |
I just get interference not noise like the radio station dial has moved of a bit, switch air-con off crystal clear again
|
||
![]() |
|
garyd Member Since: 04 Jan 2011 Location: North Essex Posts: 44 ![]() ![]() ![]() |
Just had a call from the Lancaster Land Rover Welwyn.
|
||
![]() |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20092 ![]() ![]() |
replace the word speaker with rear screen and i was right |
||
![]() |
|
garyd Member Since: 04 Jan 2011 Location: North Essex Posts: 44 ![]() ![]() ![]() |
Top Marks... Well done ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
