Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Claybar after awful winter
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Tandemman



Member Since: 30 Jun 2007
Location: Barnsley
Posts: 686

England 2009 Freelander 2 TD4 GS Auto Rimini Red

Thanks for that I'll give it a go on the mx5 . Thumbs Up

Post #103165 25th May 2011 7:17 am
View user's profile Send private message View poster's gallery Reply with quote
djwhyte



Member Since: 24 Aug 2010
Location: Brisbane
Posts: 336

Australia 2007 Freelander 2 i6 SE Auto Tambora Flame

A couple of questions.

Is the clay bar stuff instead of using a T-cut or cutting-compound? I have only ever heard of the latter before.

You say you polish and then wax. What is the difference?

Cheers,
Whytey 1st time FL2 owner. 2007 SE i6 in Tambora Flame.

Post #103173 25th May 2011 8:40 am
View user's profile Send private message View poster's gallery Reply with quote
npinks



Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

United Kingdom 

using a clay bar will removed tiny particles caught in the surface of the paint, these can be organic or just tiny grit or metal particles.



So you use the clay bar prior to polishing, as you don't want to pull and contaminates into the polish and marr the paintwork

the difference between polish and wax

the polish is a liquid that will have tiny abrasives in it that will polish the clear coat on the car, either removing swirls by removing microns of clear coat to even the surface out, or by doing this and leaving fillers also, these are part of the product that basically fill the swirls and mask the effect the sun shining on the body will have, problem with these products although they are great (Autoglym Super Resin Polish (SRP) been one of the best) the fillers will wash out, and the amount of swirls will return to some degree.

So you polish the car, correcting the clearcoat or by using some thing like SRP you want to protect the paint work, this is where you would use a Last Stage Product (LSP) such as a wax or a sealent, this will protect the paintwork, give it more gloss, and if using SRP type product it will seal in those fillers giving a swirl free look a little longer

In sort, polish is correcting & wax is protecting and giving a glossier finish

For a longer lasting shine preparation, preparation , preparation Thumbs Up Former Mod/Member, with the most post & Chicken George Arch nemesis

Post #103178 25th May 2011 8:53 am
View user's profile Send private message View poster's gallery Reply with quote
dpcwright



Member Since: 04 Feb 2011
Location: Cambridge
Posts: 71

United Kingdom 2011 Freelander 2 SD4 XS Auto Baltic Blue

Be warned that Fairy Liquid and other washing up liquids use large amounts of salt to increase the viscosity of the liquid and thus are not particularly good for vehicle bodywork

Post #103179 25th May 2011 9:07 am
View user's profile Send private message View poster's gallery Reply with quote
npinks



Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

United Kingdom 

not on a regular basis, but as a once off its not too bad Thumbs Up Former Mod/Member, with the most post & Chicken George Arch nemesis

Post #103180 25th May 2011 9:09 am
View user's profile Send private message View poster's gallery Reply with quote
djwhyte



Member Since: 24 Aug 2010
Location: Brisbane
Posts: 336

Australia 2007 Freelander 2 i6 SE Auto Tambora Flame

Thanks pinks, will have to see if that same stuff is sold here and give it a whirl Smile 1st time FL2 owner. 2007 SE i6 in Tambora Flame.

Post #103198 25th May 2011 11:57 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site