Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Wading |
|
|
The Doctor Member Since: 09 Jul 2010 Location: Gallifrey Posts: 4615 |
I found this from LR under dimensions & capabilities: http://www.landrover.com/gb/en/lr/freelander-2/explore/gs/
|
||
2nd Apr 2011 7:22 pm |
|
Tim in Scotland Member Since: 12 Mar 2006 Location: All at sea Posts: 875 |
Yes a Defender wading depth isn't that great, but then those of us who expect to go deeper have a proper snorkel (note a raised intake is NOT a snorkel as an RAI isn't watertight where it passes through the inner and out wing.....) fitted. There are other reasons why Defenders wading depth isn't fantastic - axle breathers ( they only come up to 500mm too) for a start, which again many of us who like to get the inside of our defender wet have extended by aquarium pipe up into the top of the snorkel. Freelander2 and RRS/Disco3-4 and FFRR don't need axle breathers. All of this on a defender is completely useless of course if you don't seal the battery box which is under the front passenger seat and way less than 50cm above the ground................. and of course in the more recent designs like Freelander2 you have these strange rubber things round the doors to seal out the rain which on a Defender do b r all even though they are there. How can carbon have a footprint, it has no feet?
|
||
2nd Apr 2011 7:39 pm |
|
Tigger Member Since: 30 Mar 2011 Location: L15KRD Posts: 2555 |
The air intake is in the void behind the front bumper and is really quite surprisingly low. As the result of submerging the air intake is catastrophic (before even thinking about submerging unwaterproofed electricals), I'll be sticking to the 500 mm rule! |
||
2nd Apr 2011 8:09 pm |
|
Tim in Scotland Member Since: 12 Mar 2006 Location: All at sea Posts: 875 |
Just don't try this in your Freelander2...... it will spoil the carpets.
|
||
2nd Apr 2011 8:38 pm |
|
Tigger Member Since: 30 Mar 2011 Location: L15KRD Posts: 2555 |
Here's my personal favourite for a Freelander:
|
||
2nd Apr 2011 8:41 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13289 |
I thought that too but air intake is actually the side grill At work
|
||
2nd Apr 2011 11:25 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
Nearside one isn't it |
||
2nd Apr 2011 11:32 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
The air intake is the side grill now, but on FL2.1 it was behind the front light, I presume it was because It was a early of production line car and the part was missing or was a later addition
|
||
3rd Apr 2011 5:48 am |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1389 |
At the Honiton Experience Centre I was told that the air intake is the left hand wing grill and there is ducting behind mine, a 2007 GS, that leads to the air filter. They suggested creating a bow wave and following in the trough if the water is likely to be deeper than 500mm.
|
||
3rd Apr 2011 8:41 am |
|
Mona Geeza Member Since: 22 May 2010 Location: Devon Posts: 1293 |
[quote="npinks"]
|
||
3rd Apr 2011 11:13 am |
|
Tigger Member Since: 30 Mar 2011 Location: L15KRD Posts: 2555 |
Interestingly, it was the very same Honiton centre that told me it was behind the front bumper when I visited there 3 weeks ago.... |
||
3rd Apr 2011 1:37 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13289 |
[quote="Mona Geeza"]
pinky just had his hair dressing equipment,, curls tongs rollers etc At work At home "I can't always believe facts I read on the web" - Charles Dickens winner by default of the tractor vs caravan race |
||
3rd Apr 2011 2:33 pm |
|
EdSnow Member Since: 28 Feb 2008 Location: Norfolk Posts: 131 |
I agree. I have had mine in bits and it's in the side vent ok.. All it takes is a nice gentle approach with a steady bow wave in front. A nice example is on the below clip (even if I do say so myself ) Freelander 2 XS 2.2 TD4 Met Black, with Winter pack, 18" alloys with General Grabber AT2 wellies, MANTEC Sump and Tank Guards |
||
4th Apr 2011 2:04 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
Courtesy of Lar
|
||
4th Apr 2011 5:48 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis