wanting to get this done - any recommedations for garaes in leeds to do this and price estimates  freelander 2 SE black and beige - now sold

I used this guy, not Leeds but not too far away, £150 he has a choice of shades.


http://www.ultimatetinting.co.uk/find-us-frame-2.asp?PartnerID=18 What if there were no hypothetical situations?

s7gpt wrote:

wanting to get this done - any recommedations for garaes in leeds to do this and price estimates

Contact Steve at....

http://www.glass1tints.com/

Yep highly recommended

BMW in Leeds use Dappa tints, me and a friend are booked for Sunday morning small group buy at £135 let me know if you want to get yours done, i could try and haggle a bit more!!

They have come recomended.

Great price, good job mine was £180 but really pleased, not a bubble or mark anywhere in the film - make sure they don't cut corners (not meant to be a pun ) and forget to take the door cards off

did any of you guys get the metal film or just opt for normal film also does it go over the 'dotted' bits to the edges of the windows ok ?

Oh yeah what shade for a black freelander 2 ? freelander 2 SE black and beige - now sold

Just normal film for me...it covers the dotted bits but you still see them, CG's is factory fitted (No dotted bits)
Below before....

Below after....

Factory fitted (Typical rich farmer )

isnt my car great best fl2 on the site I'd hazard a guess  At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

No need to guess CG........you ARE a hazard  ______________________
2011 Full Fat RR 4.4 TDV8
2012 FL2 SD4 Auto HSE
2013 Kawasaki Versys 650

By the way car is filthy at present, will wash it soon . The brand new 60 reg tractor is even dirtier , its been muck spreading chicken all day good job its only hired


back to topic it must be noted that the factory privacy is 100% better than film and is not going to get damaged by oversized objects, naughty children or high heels  At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Cheers all for the info, tempted to join in on Sunday and get mine done, will check yours out mcphersonstrut on Saturday and take it from there.

What % tint have people had done, thinking of going as dark as possible  freelander 2 SE black and beige - now sold

mcphersonstrut wrote:

Great price, good job mine was £180 but really pleased, not a bubble or mark anywhere in the film - make sure they don't cut corners (not meant to be a pun ) and forget to take the door cards off

Yep for sure they take the door cards off, it's the only way they can get the film below the rubber level on the inside. They do size it from the outside your right but must add more for the bottom. Obviously the rear door quarters and 3 around the boot are just trimmed to size.
The company I used, only uses UV blocking film that is guaranteed from bubbling, crazing or peeling for the life of the car, and as for your comment CG your right the factory has to be the best but our car didn't have it when we bought it second hand and it was needed IMHO. Naughty, children having a pick....well for sure it's not totally unmarkable, but you must have seen the police programme where they stop the FullFatRR bling bling with super dark tints on the front sides, PC 'Yournickedmyson' says I'll let you go if you peel some of it off and then take it all off when you get home - they try to pick at it but can't do it and end up using a pocket knife to get the peeling started.
As for high heels, clearly they should be no where near the glass and should be securely retained to the upper grab handles - tie wraps also assist....apparently...I've heard

 Former Mod/Member, with the most post & Chicken George Arch nemesis