![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Pollen Filter and diesel filter on an 08 FL2 |
![]() ![]() |
|
|
superspark Member Since: 24 May 2009 Location: Devon Posts: 877 ![]() ![]() ![]() |
As you look under the bonnet, Remove the top engine cover, there are three 8mm stud bolts and one 10mm nut located under the air intake pipe to the right hand side.
|
||
![]() |
|
posiden Member Since: 05 May 2010 Location: cumbria Posts: 47 ![]() ![]() ![]() |
cheers for the reply,
|
||
![]() |
|
Udash Member Since: 23 Apr 2009 Location: manchester Posts: 195 ![]() ![]() ![]() |
Sounds like you are looking for the cabin air filter. Its RH side behind instrument panel and located inside the heater assembly. Freelander 2 TD4 HSE Auto
|
||
![]() |
|
posiden Member Since: 05 May 2010 Location: cumbria Posts: 47 ![]() ![]() ![]() |
is it easy to get out and check then?
|
||
![]() |
|
superspark Member Since: 24 May 2009 Location: Devon Posts: 877 ![]() ![]() ![]() |
oops sorry |
||
![]() |
|
Udash Member Since: 23 Apr 2009 Location: manchester Posts: 195 ![]() ![]() ![]() |
Agree, its really good, well worth getting the access. ![]() ![]() Zermatt Silver Side Steps & Mud flaps |
||
![]() |
|
posiden Member Since: 05 May 2010 Location: cumbria Posts: 47 ![]() ![]() ![]() |
yeah many thanks for the link I was on it last night and theres some good stuff on there.
|
||
![]() |
|
s7gpt Member Since: 21 May 2010 Location: Leeds Posts: 315 ![]() ![]() ![]() |
found this advice to bleed desiel filter
|
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4643 ![]() |
Sorry, you are wrong... Fuel is drawn from the fuel tank by the engine mounted lift pump. The in-tank pump does not deliver fuel to the engine, and only delivers fuel through the two jet pumps to maintain fuel in the fuel delivery pot. See LR Technical Training - Fuel System Low Pressure - Component Description |
||
![]() |
|
s7gpt Member Since: 21 May 2010 Location: Leeds Posts: 315 ![]() ![]() ![]() |
Got the info from this site [url]http://www.justanswer.com/questions/1l6v6-what-is-the-fuel-priming-procedure-on-a-freelander-2-diesel [/url] who seems to know what he's on about, anyhow how would you bleed it then as going to do this on saturday ? freelander 2 SE black and beige - now sold |
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4643 ![]() |
Here you'll find the procedure.
|
||
![]() |
|
superspark Member Since: 24 May 2009 Location: Devon Posts: 877 ![]() ![]() ![]() |
Ive just seviced my car and you dont need the special service tool and pay the highly inflated prices. Ive just renewed the diesel filter. I used a £12 one way fuel bulb that you can buy at any boating shop and a short length of tube. slide one end of the tube over the fuel line and connect to the bulb. Then connect another short length of tube to the other end of the bulb an push it in to the line in on the fuel line. Make sure you have the flow on the bulb in the right direction and pump several times until it begines to get hard.
|
||
![]() |
|
s7gpt Member Since: 21 May 2010 Location: Leeds Posts: 315 ![]() ![]() ![]() |
Cheers all, will let you know how i get on freelander 2 SE black and beige - now sold |
||
![]() |
|
s7gpt Member Since: 21 May 2010 Location: Leeds Posts: 315 ![]() ![]() ![]() |
Badly, had to end up putting old filter back on as could not start car, where can i buy a primer tool in leeds ? freelander 2 SE black and beige - now sold |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
