Mine is hanging on by its fingernails as most of the plastic mounting brackets are broken. The new ones are c£300 but there a re some unlettered replicas available on the web for £80-90. For example, the one below. Does anyone have any experience of these replicas.

https://www.aliexpress.com/item/1005005526...gIswfD_BwE Freelander 2 TD4 HSE 2010
Freelander 2 TD4.e 2009
Discovery 4 3.0 HSE Lux, 2015
Discovery 4 3.0 HSE, 2011
Range Rover L405 5.0 SC, 2014
Range Rover L322 4.2 SC, 2005
Range Rover P38 4.4, 2002

Last edited by RRBlue on 29th Dec 2024 5:24 pm. Edited 2 times in total

Doesnt answer your question - sorry.
You'll have to spray it but you never know it might be better made than the original.


Or try 2nd hand from the scrappers Jules

Checked the scrap dealers. They are £150+

I had not realised it needs painting but that should not bee too difficult as the old girl is a bit ragged anyway. Freelander 2 TD4 HSE 2010
Freelander 2 TD4.e 2009
Discovery 4 3.0 HSE Lux, 2015
Discovery 4 3.0 HSE, 2011
Range Rover L405 5.0 SC, 2014
Range Rover L322 4.2 SC, 2005
Range Rover P38 4.4, 2002

I fitted one of these;

https://www.ebay.co.uk/itm/146114959820?_s...BM_IKWtYJl

Mine was looking scabby. so while fitting a rear camera to go with my satnav replacement I got one of those.
It did have the writing on it.
Almost identical to OEM except it's about 5mm narrower. (Couple of mm either side.)
AND
It didn't need spraying, though I did spray mine black.

PS. You need the fittings from the old one. What you have should still be OK to use as it's the plastic that goes.

Thank you. That is the confirmation I needed. I will get one ordered. Freelander 2 TD4 HSE 2010
Freelander 2 TD4.e 2009
Discovery 4 3.0 HSE Lux, 2015
Discovery 4 3.0 HSE, 2011
Range Rover L405 5.0 SC, 2014
Range Rover L322 4.2 SC, 2005
Range Rover P38 4.4, 2002