Hello, I purchased a 2007 Freel2 in Febr. A few weeks ago when pushing the Start/Stop button the Steering Column Lock error signal appeared in Italian (as it comes from the Italian market). After disconnecting the + pole-shoe the engine started perfectly. This failure occured repeatedly. Once I had to leave the car at the mechanic for the weekend, until the temporarily disconnected electronic control unit took a new lease of life. The incidence rate is too high not to ask you for a tip, if you have any. Thanks in advance for your advise.

A few choices, buy a new module and replace. Will require JLR SDD to marry the replacement module to the ecu.

Once unlocked, install a steering lock emulator, a cheaper fix. A search on the forum should bear some threads.

Use JLR SDD in engineering mode to remove the steering lock option completely from the CCF, car configuration file once unlocked.

Some on the forum have used lube as a temp solution to keep the lock functioning.

Thank you.

This thread was discussed recently with similar question

https://www.freel2.com/forum/topic39967.ht...ering+lock FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Thanks, Ian.