Freel2.com - View topic - Flywheel resurfacing/replacement


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Flywheel resurfacing/replacement

Page 1 of 1

Print this entire topic ·

CTKC

Member Since: 11 Apr 2024
Location: Poperinge
Posts: 1

Flywheel resurfacing/replacement

Hi everyone.

New member here, I'll introduce myself properly afterwards in the appropriate forum.
I have a rather urgent question since I'm on a two weeks to France trip quite soon.
So my clutch let go recently, opened it up and turns out the pressure plate fingers were done for, no real surface wear on the dmf other than some heat spots (have only been owning it since a month).
I went ahead and sanded it evenly, as I don't know of any machine shop near or afar, I'll include some pictures.

Before:

Click image to enlarge

After:

Click image to enlarge

The problem lies in finding a new one; they are prohibitively expensive or out of stock, the only on I found at a "reasonable price" was 360 euros, but there's a catch: it's for pre-facelift model (-Y2011), so visually it's different than mine. Here and there on the forums I read something along the lines of the facelift model being stronger due to the introduction of the start/stop. Any truth to this ?
Does anyone know of some available or compatible DMFs, like maybe the 2.0 Ford TDCI ? (looks the same as a pre-facelift Freelander kit)

This is what the pre-2011 flywheel looks like:

Click image to enlarge

And here's the post-2011 flywheel:

Click image to enlarge

Thanks for your input!

11th Apr 2024 12:02 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum