Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > H11 bulb not working
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
FL2ukkent



Member Since: 13 Sep 2023
Location: Kent
Posts: 35

United Kingdom 2011 Freelander 2 TD4 GS Manual Fuji White
H11 bulb not working

Notice yesterday my near side dipped head light bulb was not working, expecting it just to be the bulb purchased a new one. This morning removed the head light to find the bulb ok but the plug connecting to the bulb burnt away. Now with only a few days until its MOT what to do? then spotted that the bulb pins looked to be about the correct size for 1/8” spade connectors, tried one and it was a nice tight fit.
So cut the wires to the faulty plug soldered the three wires 2 + 1 to two spade connectors and insulated with heat shrink tubing. Fitted the new bulb also. Working now until i can source a proper plug, link please if anybody knows a supplier.


Post #438347 11th Jan 2024 12:29 pm
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2594

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

Strange the plug would melt like that but the bulb be ok. Nice work around though good luck with the test.

Post #438348 11th Jan 2024 1:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Aveling



Member Since: 24 Mar 2011
Location: Cardiff
Posts: 265

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Firenze Red

I believe there are others who have had the same problem.
I suspect higher wattage bulbs put more strain on an already weak area and cause the plug to melt.
There are ceramic versions available I believe.
Try ebay presumably for a source of such things.

Post #438349 11th Jan 2024 1:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 2071

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

I suspect the burning issue is dependent on how many bulbs have been replaced over the plug's lifetime. These high power connectors only have a life of a set number of insertions before the spring pressure begins to reduce, causing higher resistance and overheating.
Fitting spade connectors will overcome this issue, and are easily replaced when they fail. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Post #438375 12th Jan 2024 4:16 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site