Now i maybe nearly 81 but reasonably computer literate.
Need help with the Autel.
Cannot seem to get anything but all the diagnosis section.
How do get onto live data.?
Even better , anyone in west scotland with an autel that we could meet sometime and get a course on Autel.
Is it something simple. Have looked at all the videos i can find.
Maybe getting senile. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Can you access the EOBD section

When you have the menue with autoscan and control unit shown, select control unit. This will bring up all the control units. Select the one you want , this will bring up another menu live data is at the bottom

Thanks. Will have another try this week. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Once you get the gist of it the menu is intuitive. There is a lot of stuff on there to fiddle with

Thanks to all. Not senile yet. Accessed ok.
Checking the diagnosis bit for faults. Few faults listed but nearly all intermittent.
Car is auto and stop/start is a permanent fault. Not on an auto.
Have a fault P2195–oxygen sensor—low circuit voltage bank 1.
Should I replace the sensor or what.
Advice please
Thanks Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Running with a faulty sensor can cause more problems down the line. O2 sensors are replaceable items just as say Filters or Glow Plugs. There is one on the 2.2 Diesel but it's more costly to do than an oil filter of course and a hell of a lot more difficult if its DIY,

The info is the sensor should last around 100,000 miles.

What are your live values for the sensor.

Hello Chips, went back in , cleared all the faults and did a new diagnosis.
Sensor fault has disappeared.
Still some other intermittent faults like doors.
Will try again tomorrow and see what I get. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone