Hi anyone in Liverpool area help rounded my locking nut key welded nut to one to get out but need to get other 3 out pic of my nut pattern if any one can be kind to help have order new set but want off just in case whilst waiting thanks

To save others looking.

Click image to enlarge

If you need to get it off, tighten the other 4 nuts as much as you can. But not with an impact wrench.

Make a key by drilling a couple of holes through a bit of aluminium plate, preferably 5083 alloy. Push through the drilled holes some spare Allen Keys. Put a leaver through the back end of the keys. The aluminium will stop the keys twisting. Allen Keys are hardened enough to not bend unless they are Chinese rubbish. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18