sqeeky dashboard on freelander 2 metropolis only on hot days driving me nuts help please .

Squeaky dashboard is a bit generic. There are some photos in this thread https://www.freel2.com/forum/topic33026-61.html behind trim panels. If in the corners you will need to take off the A column trim panel, screw (star bolt) behind airbag logo. Then pull out the vent, then lift up the speaker trim, they both need a sharp tug to pull out.

It is very well put together so really shouldn't squeak.

If it is the driver's display, there are 2 screws at the top, undo those & pull the display forward, there is an empty space behind, but maybe an edge might rub.

Have a look at the rest of the thread as there are a few more photos & comments that may help. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Thanks lightwater, problem seems to be driver's display area,only when been in the sun, different amounts of expansion i guess.