![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > should air filter box be screwed up tight ?? |
![]() ![]() |
|
|
JonMs Member Since: 25 May 2018 Location: Ilkley Posts: 102 ![]() ![]() ![]() |
The self tapping screws are often over-tightened and strip the threads out. There are various solutions to this. On my car I drilled out the plastic and put in Helicoil thread inserts. Now the filter box is held on by stainless Hex screws. Much better! |
||
![]() |
|
Aveling Member Since: 24 Mar 2011 Location: Cardiff Posts: 274 ![]() ![]() ![]() |
Another solution I saw somewhere the other day was to put the tail of a cable tie down the hole, cut off flush and screw the screw in as normal - job done. |
||
![]() |
|
Badger51 Member Since: 01 Mar 2014 Location: Korora Posts: 991 ![]() ![]() |
Cheap fix for stripped nylon threads, which is not uncommon!
|
||
![]() |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 ![]() ![]() ![]() |
great answers . . . . .I am off to try cable tie trick now |
||
![]() |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1784 ![]() ![]() ![]() |
Glue a wall plug in , trim it flush , use a self tapper . Job done neatly . 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership
|
||
![]() |
|
Jack frost Member Since: 21 Dec 2011 Location: UK Posts: 796 ![]() ![]() |
Or superglue the cover down for a permanent job |
||
![]() |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 ![]() ![]() ![]() |
UPDATE : - cable tie idea enabled the front 2 screws to be tightened and problem solved, many thanks for input.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
