Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Whine Under Load Up Hill
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Wooly



Member Since: 16 Oct 2021
Location: Wales
Posts: 34

United Kingdom 2011 Freelander 2 SD4 HSE Auto Kosrae Green
Whine Under Load Up Hill

This evening on the way home, instead of sitting through traffic, I decided to take the long way home over the hills and through a place called "Worlds End". Essentially it's a large moorland area between Llangollen and Wrexham. The aproach to this from Llangollen is up a single lane track at a reasonable gradient.

When climbing at times I was hearing a whine noise which I believed was from the front end. It only presented it self when going up the steep sections and only at approx 25-30mph. I couldn't go faster to see if it was still there, but certainly when crawling up at 10mph it wasnt there.

Does anyone have any experience of this?

I'm a little bit of a worried (I know I shouldn't be) and have visions of diffs exploding or haldex unit issues. Especially as the car is a little loud at 50mph+. However I'm not sure if this is the tyres etc. It's just loud, not a whine noise such as I experienced earlier.

Any thoughts would be gratefully received?

** Side note. If I was to take it to someone to have a look at / look after, does anyone have any recommendations in the North Wales area? Or am I best using a local indy for servicing and then someone like Bell Engineering for any drivetrain issues / suspected issues?

I've seen some posts about Bell Automotive in Deeside and NorthWales4x4, but nothing recent. Anyone with recent experience?

Post #414564 12th Nov 2021 10:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Tpot



Member Since: 26 Nov 2011
Location: Wiltshire
Posts: 40

United Kingdom 2014 Freelander 2 SD4 XS Auto Loire Blue

I recently used Bowydd Garage in Blaenau Ffestiniog for a Haldex service, rear diff oil change, PTU oil change. They also investigated an EGR fault. They are very knowledgeable and have the latest software to diagnose and keep up to date the online service documentation. Locally they have a very good reputation. Might be worth a phone call, guys names are Callum and Lee.

Cheers Tony

Post #414584 14th Nov 2021 8:34 am
View user's profile Send private message View poster's gallery Reply with quote
OLOSTEVE



Member Since: 18 Dec 2016
Location: Swanton Abbott, Norfolk NR10 5DU
Posts: 332

United Kingdom 2014 Freelander 2 TD4 XS Auto Firenze Red

You, haven't mentioned if you have manual or auto box.
If, auto, have you changed the fluid?

Post #414596 14th Nov 2021 5:19 pm
View user's profile Send private message View poster's gallery Reply with quote
Kage



Member Since: 03 Oct 2018
Location: Midlands
Posts: 236

United Kingdom 2012 Freelander 2 SD4 HSE Auto Santorini Black

His profile says it’s an SD4, so automatic.

Post #414597 14th Nov 2021 5:55 pm
View user's profile Send private message View poster's gallery Reply with quote
ReggiePerrin



Member Since: 13 Mar 2013
Location: Derbyshire
Posts: 1273

England 2013 Freelander 2 SD4 HSE Lux Auto Firenze Red

OLOSTEVE wrote:

You, haven't mentioned if you have manual or auto box.
If, auto, have you changed the fluid?

Wooly = 2011 Freelander 2 SD4 HSE Auto Kosrae Green

Tpot = 2014 Freelander 2 SD4 XS Auto Loire Blue

Post #414598 14th Nov 2021 5:59 pm
View user's profile Send private message View poster's gallery Reply with quote
OLOSTEVE



Member Since: 18 Dec 2016
Location: Swanton Abbott, Norfolk NR10 5DU
Posts: 332

United Kingdom 2014 Freelander 2 TD4 XS Auto Firenze Red

Kage wrote:
His profile says it’s an SD4, so automatic.

Didn't think to do that, not as though I'm new to this site not very Computer literate, in my defence.

Post #414599 14th Nov 2021 6:35 pm
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3133

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Two simpler solutions to check.

Is it turbo whistle?

Check if the 'noise blocking' gaiter at the base of the steering column is sealing properly.

Check turbo hoses have not started to leak. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Post #414601 14th Nov 2021 6:53 pm
View user's profile Send private message View poster's gallery Reply with quote
Wooly



Member Since: 16 Oct 2021
Location: Wales
Posts: 34

United Kingdom 2011 Freelander 2 SD4 HSE Auto Kosrae Green

Thanks IanMetro. I'll have a look at both today.

Post #414623 15th Nov 2021 12:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Stubbenoldgit



Member Since: 15 Nov 2012
Location: Worcestershire
Posts: 146

United Kingdom 2010 Freelander 2 TD4 HSE Lux Auto Zermatt Silver

Just completed a bit of a saga with a similar noise. Essentially got a noise from front end, ( whine/ rumble) most noticeable 40/50 when under load such as climbing a hill. Sounded a bit like a bearing but climbing a local hill at 40, you could 'switch' the noise on'/off by slight pressure on the gas or easing off very slightly. Running it in a different gear had no effect, it's an auto btw, accelerating gently downhill through same speed range there was no noise. Very gentle acceleration on the flat no or little noise, but give it some gas and at 40mph noise kicked in.

Unlike typical wheel bearing noises no effect on cornering, though at one bit did have a wheel bearing grumbling so that confused issues for a while. Messed about with swapping wheels round, tyre pressures, no effect. Eventually decided it was transmission related to amount of load applied and likely to be from power transfer unit.

PTU removed and stripped, bearings changed, seemed a bit better but still not right. Ran it for a while to see what happened. No change.

After a few months at a suitable time removed and stripped again, now gear set replaced on advice from gear specialist who looked at the unit and suggested it was wear on the gears. Rebuilt and apart from some malarkey with oil leaks which needed yet another strip and yet another set of oil seals it's now running as quiet and smoothly as it did 10 years ago.

Would it have been less hassle to just bite the bullet and go for a speculative exchange PTU, probably, but that's hindsight for you.

Post #414832 20th Nov 2021 12:31 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site