Hi all, when I connect my phone to my 2008 fl2 it connects OK and works. The problem is when I turn the engine off & come back it doesn't remember my phone so I have to re program/ connect it again.
Is their a way of it remembering my phone ?

On the later cars, whether the earlier model cars can, I don't know.

You can connect the car to the phone or phone to the car. Maybe this helps. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Is there any 'old/previous' phones still stored on the radio, I do know that it only stores so many so it may be full, hence not storing your phone, you can delete the old phones.

No other phones stored

Sounds like either the phone isn't compatible, or not configured to reconnect automatically.
It's potential possible that the BT module is faulty, and not remembering the connection, but I wouldn't think that is likely. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

With newer phones what you may find is linking the phone to the car works better than linking the car to the phone, this is because the software installed in the car does not always remember newer phones I think because a compatibility issue.

I hope this makes sense. MY13 HSE Lux Santorini Black Gone
MY11 HSE Santorini Black Gone
MY08 SE Blue, Gone
Alfa Romeo GT Gone
Alfa Romeo 156 Space wagon Gone
Volvo V40 Gone
Volvo 480ES Gone
VW Sirocco GTX Gone