Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > In Car Electronics > Supply to brake controller
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver
Supply to brake controller

Looking at fitting a brake controller for the van and they recommend using a dedicated supply from the battery with a auto resetting CB
Which would be the best way to get through the firewall to the battery?

I've mounted the controller to a board to fit under the drivers seat and have the control knob in a container in the centre console
I want to remove when not in use

I also require a feed from the actual brake switch
How difficult is it to get to ? Shocked
Or can I just fit a relay to the brake circuit Wink

Cheers
Pj
Post #406415 10th Apr 2021 9:26 am
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494
Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Hi Pj
I've put cables through the firewall in a couple of locations -
a couple of cables

went alongside the bonnet release cable
one went through a hole I put through the firewall down behind the battery - it comes into the cabin just above the passenger side fusebox. MY11 SD4 SE Auto
Post #406423 10th Apr 2021 11:17 am
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Cheers
Tomorrows job hiding from weather
Post #406424 10th Apr 2021 11:27 am
View user's profile Send private message View poster's gallery Reply with quote
Wonderdust



Member Since: 23 Mar 2020
Location: Bucks
Posts: 168
United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Santorini Black

Grommets!
Post #406425 10th Apr 2021 12:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Not sure a young surfer can help Rolling with laughter
Post #406427 10th Apr 2021 12:19 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1450
England 2007 Freelander 2 TD4 GS Manual Baltic Blue

Just a vehicle fire waiting to happen!
Post #406430 10th Apr 2021 1:13 pm
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Quote:
Just a vehicle fire waiting to happen!


No I'm not using local Auto Electricians Rolling with laughter
Post #406435 10th Apr 2021 3:31 pm
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

I believe that Wonderdust and BossBob are referring to the fact that any wire in a vibration rich environment must be away from any solid edge or if close to one, properly protected.
Vibrations on a wire that's touching any kind of edge tend to encourage isolation grinding and later an exposed wire (positive) touching the chassis (negative) is a disaster waiting to happen.
Post #406436 10th Apr 2021 4:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Fair enough. Was going to run in twin core double insulated with grommet or glands
Electrician by trade so have some idea
Thanks
Post #406459 11th Apr 2021 12:52 am
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1450
England 2007 Freelander 2 TD4 GS Manual Baltic Blue

Thumbs Up
Post #406471 11th Apr 2021 9:16 am
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Had a bit of a poke around trying to work out which way to go with wiring etc
Bit the bullet and got local Auto electrician to quote

$700

Big Cry
Post #406631 15th Apr 2021 4:17 am
View user's profile Send private message View poster's gallery Reply with quote
Badger51



Member Since: 01 Mar 2014
Location: Korora
Posts: 986
Australia 

When do you start Rolling with laughter (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)
Post #406632 15th Apr 2021 4:36 am
View user's profile Send private message View poster's gallery Reply with quote
Pejo



Member Since: 10 Dec 2020
Location: Perth WA
Posts: 181
Australia 2014 Freelander 2 SD4 HSE Auto Indus Silver

Tomorrow Thumbs Up
Mobile guy just quoted $165
Post #406633 15th Apr 2021 5:02 am
View user's profile Send private message View poster's gallery Reply with quote
Badger51



Member Since: 01 Mar 2014
Location: Korora
Posts: 986
Australia 

Now that’s more like it Thumbs Up (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)
Post #406634 15th Apr 2021 5:47 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site