Freel2.com - View topic - Front Passenger Door Issue drooped by 5 mm


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > Front Passenger Door Issue drooped by 5 mm

Page 1 of 1

Print this entire topic ·

jones65

Member Since: 18 Feb 2018
Location: grantham
Posts: 60

Front Passenger Door Issue drooped by 5 mm

Hi has anyone had this problem or can give me advice
When opening the Passenger Door it drops by 5mm or more and has started to touch the rear door at the top how .
All the bolts are tight and it looks like the hinges have not moved
Any advice wood be helpful

thanks brian
2008 HSE

16th Dec 2020 9:56 pm

dondiddy

Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

2012 Freelander 2 TD4 HSE Manual Firenze Red

The issue would normally be one of two things. Either a worn hinge or a split in the door/door pillar at the mounting point. To check have someone sit in the passenger seat to look for movement. Open the passenger door a foot or so then grasp the lower rear corner of the door and try and lift the door up and down.Any wear in the hinge will show up or if the metal has started to split where the door is bolted on then this should show up as movement which you should be able to see. Other than that it could be damage to a hinge or door frame caused by the door getting caught by a strong wind and blown open past it`s normal opening gap. Good luck! ,

17th Dec 2020 7:28 am

Nodge68

Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

2009 Freelander 2 TD4 SE Manual Rimini Red

Re: Front Passenger Door Issue drooped by 5 mm

jones65 wrote:
Hi has anyone had this problem or can give me advice
When opening the Passenger Door it drops by 5mm or more and has started to touch the rear door at the top how .
All the bolts are tight and it looks like the hinges have not moved
Any advice wood be helpful

thanks brian
2008 HSE

Have you tried lifting the door, to see where the movement is coming from? Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

17th Dec 2020 9:42 am

jones65

Member Since: 18 Feb 2018
Location: grantham
Posts: 60

hi yes i have tried to lift the door up but it does not seam to have any play in it .
but i am trying to look on my own at the moment .
i have checked around the door frame where the hinges bolt to and can not see no dammed
i will have to wait until i can find someone to move the door for me .
thanks brian

17th Dec 2020 5:58 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum