Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > In Car Electronics > Fuse keeps blowing (Interior Lights & Door Controls) |
|
|
sobrinho Member Since: 22 Jul 2019 Location: Brazil Posts: 96 |
Probably a short circuit.
|
||
23rd Oct 2020 6:37 pm |
|
Delboy Member Since: 31 Aug 2017 Location: Norwich Posts: 108 |
This is a bit of a long shot but no harm in checking. I had a similar problem (interior lights fuse kept blowing) caused by a 1p coin which had fallen into the cigarette lighter socket on the centre console. Have a look in it for any metal items which may have got in there. Fingers crossed for you. Derek Hill
|
||
24th Oct 2020 2:35 pm |
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 |
It would be worth checking the door wiring in the rubber boot where it goes from the door pillar into the door itself. Over time the movement of opening and closing the door can cause the wires to break and they could be shorting against each other. It might need the fuse replaced then a bit of detective work to see exactly what action taken causes the fuse to blow again. Good luck! |
||
24th Oct 2020 3:36 pm |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1545 |
I would take the overhead light unit out and see if there is any improvement. Maybe the central overhead light unit and the rear boot light too or at least check if they are on the same circuit. It's a shot in the dark forgive the pun but it's an easy step in testing the fault |
||
24th Oct 2020 7:38 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4907 |
So you can test & stop going through fuses. Dremel off the back edges of a fuse & solder on some wire & plug in a panel circuit breaker. They make these in 1, 2, 3, 5, 7, 10 & 15 amps. Procrastination, mankind's greatest labour saving device!
|
||
25th Oct 2020 2:05 am |
|
shiggsy Member Since: 13 Jan 2013 Location: Kent Posts: 799 |
Bit of long shot but a fairly easy check, there are some wires under the air filter which are prone to getting rubbed through. Not sure what the wires are though.
|
||
25th Oct 2020 11:53 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis