Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Transmission faults
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
kouba



Member Since: 16 Apr 2020
Location: Sudoměřice
Posts: 7

Czech Republic 2008 Freelander 2 TD4 S Auto Stornoway Grey
Transmission faults

Hello
I have a problem with aisin gearbox in my 08 freelander 2
When I start cold car and drive, gears start to slipping and sometimes jerking
But when I preheat the car before I go, then the automatic shifts normally

Diagnostic write this faults:
P0741
P074A
P073F
P0732
P074A
P0736
P0731
As I have read my free2 subject to the Service action q59 and q106 because
The cars VIN nr is H126544
But I can’t search mention in service history about this...
Mielage is about 180k km


Has anybody a problem like this one?

Apologize my English skills, please

Post #390488 26th Apr 2020 12:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 09 Dec 2009
Location: Manchester
Posts: 2183

United Kingdom 

Silly question but here goes - when was the oil last changed?

75K miles (120,000km) is about as far as I would push the oil in an 08 auto gearbox, also it has been in there a long time.
The box is sensitive to the correct grade of oil, so if it has been changed was the right grade of oil used?

Note dropping the oil out of the drain is not an oil change, you will need to drop the oil out of the drain, refill, warm up the gear box and repeat about 6 times to get the majority of the oil out. Or you could find a specialist who can do a full change with a machine that lets the old oil out while filling with new while the engine is running.

As an experiment, first undo the filler, then drop out the oil from the drain and check the colour, bright red is good, dark red or brown is too late. I said undo the filler first as it can be difficult, and you really don't want to take oil out of the gearbox without the ability to replenish it. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #390491 26th Apr 2020 1:57 pm
View user's profile Send private message View poster's gallery Reply with quote
kouba



Member Since: 16 Apr 2020
Location: Sudoměřice
Posts: 7

Czech Republic 2008 Freelander 2 TD4 S Auto Stornoway Grey

The former owner claimed that he changed the oil cca in 80000 miles but I don’t have any document so I am not sure if he made it or not
What do you mean too late - complet gearbox rebuild?

Thanks so much

Post #390532 28th Apr 2020 12:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 09 Dec 2009
Location: Manchester
Posts: 2183

United Kingdom 

Too late means some damage will have been done.
I didn't change mine until 120,000 miles and she had started the odd harsh change. Did another at 150,000 miles just to clear out any debris (burnt clutch linings etc). At 180,000 miles she had started to play silly devils when towing at high speed, up steep hills with 1,500kg of caravan on the back - think Pyrenees and 70mph. still OK solo.
It was time for a gearbox change/overhaul, I was recovering from a heart bypass and so was unable to do it myself, the family convinced me to get rid of the car - big mistake, a decision I regret every day since. Should have bought a Disco Sport and kept the Freelander for weekends. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #390536 28th Apr 2020 1:24 pm
View user's profile Send private message View poster's gallery Reply with quote
kouba



Member Since: 16 Apr 2020
Location: Sudoměřice
Posts: 7

Czech Republic 2008 Freelander 2 TD4 S Auto Stornoway Grey

Update:
I changed the oil 2 weeks ago but there has been still the fault for a week. At the moment gear change is ok but sometimes I can feel vibration when I go uphill. The sequential gear change still says “a violent gear change”.
Is necessary to adaptation the control unit AT after oil change? At the service they didn’t do that.
Thanks for answers.

Post #391673 27th May 2020 9:11 am
View user's profile Send private message View poster's gallery Reply with quote
Arese



Member Since: 09 Jan 2012
Location: Casablanca
Posts: 397

Morocco 2012 Freelander 2 TD4 HSE Auto Santorini Black

Hi

What oil u put inside ? how many drain and refill ?

as far as I know, no box ECU adaptation is required after the oil change

Post #391697 27th May 2020 10:05 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1236

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

This is what I use in my 2008

Click image to enlarge

Post #391699 27th May 2020 11:46 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5002

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

what oil u put inside ? how many drain and refill ?

Any ATF will do that meets JWS 3309 or 3324 depending on age . Its in your user manual.


as far as I know, no box ECU adaptation is required after the oil change

Yes Im sure thats correct.

Mine had a noticeably smoother gear change when I changed the ATF at 5 years and 40K miles. Did serial exchanges (drain/ refill/circulate/drain etc ) until about 90% of old ATF removed. I did 4 exchanges (calculated based on a total gearbox ATF volume of 7L and a drain vol of 3L) Jules

Post #391718 28th May 2020 1:12 pm
View user's profile Send private message View poster's gallery Reply with quote
kouba



Member Since: 16 Apr 2020
Location: Sudoměřice
Posts: 7

Czech Republic 2008 Freelander 2 TD4 S Auto Stornoway Grey

Hello again, I still have problems with the automatic. A company changed the oil (it is named LR002748). Unfortunately, I can’t find out how much they put there.

The diagnosis writes error:
P074e
P073f
P029
P0731
P0736
U2101
U2100
P0706

From the upper part of the automatic we can heard this strange sound:



Should I check any cables, fuses or relay, which could make that?

The automatic sorts normally and I do not feel any changes in gear change.

Thanks so much

Post #397256 21st Sep 2020 6:40 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site