Hi All, Looking for a little help with my Freelander 2.. 2007 TD4

I have just changed both front Bearing/Hub/Knuckle assemblies, passenger side drive shaft and installed new ABS sensors to the front end and now I get the dashboard lit up like a Christmas tree and the following DTCs

U0415 - ABS Invalid data
U0401 - Invalid data Engine Control Module, Powertrain Control Module.
U0418 - Invalid data Brake System Control.
C0034 - Front Right Wheel Speed Sensor.
C0031 - Front Left Wheel Speed Sensor.
U0423 - Invalid data Instrument Panel Control Module.
U0422 - Invalid data Body Control Module.

The service manual indicates when replacing the ABS sensors, they need configuring with IDS, whatever that is....

I have checked all the relevant fuses and those are all fine. The battery, is showing 12.06 Volts with all turned off and 10.96 Volts with ignition on, then as you would expect, 14.36 Volts with engine running.

Electronically speaking, all i changed was the ABS Sensors, surely I cant have received 2 faulty ones...

Any help would be greatly appreciated...

No, the sensors need to be coded to the car with SDD.

Dealer trip unfortunately, unless anyone on here has a cracked copy and a cloned Mongoose cable....

Thank you for the prompt reply... Gone are the days when you could do it yourself...

I have been scratching my head for several days tracing wiring diagrams etc..

I will call the local dealership and get it booked in..