Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Wheels & Tyres > 17" GS Alloy Official Description
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Sperly



Member Since: 26 Dec 2019
Location: Warwickshire
Posts: 195

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue
17" GS Alloy Official Description

I wonder if anyone on here can help me. I have tried searching for an eternity but cannot get a definitive answer on this subject.

I'm after either the official LR Style description and/or Part number for the 17" Alloy that was fitted as standard to the GS Model. It looks just like the picture below.

If anyone can advise me of this, I would be very grateful.

Thanks in advance.


Post #385445 29th Jan 2020 5:48 pm
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

Wheel is called 17"6 spoke silver sparkle style 1 and part number is LR006681. Hope this helps! Thumbs Up

Post #385446 29th Jan 2020 6:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Sperly



Member Since: 26 Dec 2019
Location: Warwickshire
Posts: 195

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue

That's perfect, thank you for responding so promptly. Now to throw that at LandRover CRC and ask them why the rears don't fit a DS properly but the fronts do!

Thanks once again. Thumbs Up

Post #385447 29th Jan 2020 6:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2816

United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

Hows it not fit?, these are same fitment and interchangeable. Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Post #385456 29th Jan 2020 7:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Sperly



Member Since: 26 Dec 2019
Location: Warwickshire
Posts: 195

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue

Bobupndown wrote:
Hows it not fit?, these are same fitment and interchangeable.


Exactly!!

They fit on the hub no problem. Unfortunately, the lower control arm (rears only) is/are catching the inner lip of the alloy by literally millimetres, not even 5.

I'm puzzled by this - the fronts clear it no problem, but both rears are fractionally catching. I'm wondering if the rear lower control arms are adjustable and need adjusting due to it leaving the factory on 20"s.

Post #385457 29th Jan 2020 7:23 pm
View user's profile Send private message View poster's gallery Reply with quote
RogB



Member Since: 16 Dec 2014
Location: Mansfield
Posts: 3881

England 2013 Freelander 2 SD4 HSE Lux Auto Santorini Black

I could be wrong but isn't the smallest wheel fitted as standard to the DS an 18'' diameter ?

by fitting a 17'' wheel are you then reducing the clearance on the inside of the wheel over the hubs etc ?



p.s. Im no mechanic so not 100% sure where the lower control arm is in relation the wheel/tyre Whistle

Post #385481 30th Jan 2020 8:10 am
View user's profile Send private message View poster's gallery Reply with quote
Sperly



Member Since: 26 Dec 2019
Location: Warwickshire
Posts: 195

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue

No, they offer the Pure variant in 17" as standard.

As I say, they all fit, it's just the rear suspension assembly is just catching....

Have emailed CRC and requested that they ask technical for the definitive

Post #385483 30th Jan 2020 8:18 am
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

I think the problem will be the fact that the Disco wheel has a different offset (ET45) to the Freelander wheel which is ET55 and as a result will sit 5mm further in towards the hub resulting with the rubbing on the back. The Disco sport track is slightly wider on the rear which may be why the suspension set up on the back is different and sits closer to the hub than it does at the front.

Post #385495 30th Jan 2020 10:59 am
View user's profile Send private message View poster's gallery Reply with quote
Sperly



Member Since: 26 Dec 2019
Location: Warwickshire
Posts: 195

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue

Yes, you are on the money with that dondiddy. That 10mm is the crux of it, so will need to order some spacers to compensate. Frustrating, as I was hoping that they would be a straight swap.

Post #385498 30th Jan 2020 11:13 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site