Member Since: 24 May 2018
Location: Arcore
Posts: 41
Premium Surround Sound Upgrade Retrofit
Click image to enlarge
Good morning to everyone,
after the DAB company, as already mentioned in that discussion, I also wanted to implement and complete the Mid Line, a premium system, activating all the feasts of the Alpine standard audio system, as seen from the image, now also appears a new writing at the start of the audio, the Dolby surraund in fact.
The sound is much more powerful, and full of nuances, we pass from the 40 Wat of the Mid line to 70W of the premium, we add another 5 speakers + o- originals, in addition to replacing the amplifier with one that supports the Prologic and has the hooks for additional boxes.
shopping list
LR001695, 1x, central speaker
LR001694, 2x, side speakers
LR001845, 1x, right rear pillar speaker
LR001846, 1x, left rear upright speaker
LR007312, 9x, screws
LR006214, 9x, screws threaded sheets
LR009653, 1x, Premium Surround amplifier (available on ebay cod 6H52-18C808-DD)
let's move on to the photographic documentation:
(some photos are taken from the Australian site from which I drew inspiration to do the job, you will understand that working from 18 to 2 at night some photo step I escaped ....)
let's start by identifying the right amplifier
note the extra connector to which the connector that is hanging orphaned nearby should be connected
to consider that I have not used the speakers that go on the original rear upright, I have taken and mounted these
original:
on the other hand, it takes its own, the two small side ones
and the central one
you have to replace the old amp with the new one, reconnecting it exactly as the old one was connected, adding the dangling connector, which finally finds its hooking point
this will bring the audio signal to the speakers we just added and hooked to their connectors, which are now dangling too
once hooked up, as it is said on the Australian forum, it is not a plug and play modification ... but you have to activate the new amp via SDD, the voice to be changed is this
Click image to enlarge
we will pass from high performance 40w 8 speakers (or any other parameter is already present by default) to 70w 12 speakers
Click image to enlarge
VOILA 'the game is done .... "so to speak"
here are also other photos of the new audio menu
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
sorry for the bad English By google translate ....
19th Jun 2018 9:11 am
Germplus1
Member Since: 19 Jul 2019
Location: Hampshire
Posts: 118
Fantastic. I have installed all the speakers and the amp.
Only thing is the software sdd edit.
Bought a laptop and the software.
What is the best obd cable to connect the laptop to the freelander 2 please.
I am a beginner. Can I use any Usb obd2 cable?
Also does this activate the DAB radio as well? Or I have to enable that in the Sdd
software.
Thank you.
24th Jul 2019 1:58 pm
Peppino.1962
Member Since: 24 Apr 2019
Location: Foggia
Posts: 7
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
24th Jul 2019 1:58 pm
