![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Squint Steering Wheel |
![]() ![]() |
|
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Seems from searches other people have had the same issue after a clutch change.
|
||
![]() |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3882 ![]() ![]() ![]() |
deleted - as I was talking |
||
![]() |
|
turbodi16v Member Since: 25 Nov 2013 Location: devon Posts: 31 ![]() ![]() ![]() |
steering wheel is disconnected at the bottom. if you look in the footwell you will see a pinch bolt just up from the rubber boot were the steering connects through the bulkhead to the steering rack. |
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
As above. Tracking will not be out. They have disconnected the steering column to drop the subframe to get the gearbox out and didn't refit it in the same position. Shouldn't let a car go out like that. Take it back and get them to put it right. Past: FL2 TD4 HSE Auto
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Thanks for the replies folks.
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
So before I go back in on Tuesday, some info would be useful in case I'm being bull crapped.
|
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
Was it like it when you took it in? No. Was it like it when you drove it out? Yes. Then it’s something they did and they should put it right. If they don’t want to put it right free of charge, tell them you’ll get an opinion and a fix at a main dealer and if it’s their fault, you’ll be looking to recover the costs. There’s NO WAY a steering wheel would be off centre without someone disconnecting it and reconnecting it wrongly. It’s a lot more work to put that right now the subframe is back in place. Have a look at the splines/nuts and see if you can see any marks on them. Past: FL2 TD4 HSE Auto
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Cheers Steve. Just went into the footwell to take a look and they have definitely been down there.
|
||
![]() |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 ![]() ![]() ![]() |
There should I believe be a grommet around the shaft to stop noise entering the car. FL2 MY10 TD4 GS traded in at 2 years
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Ta. That would suggest it was tinkered with. I don't know why the garage would say they don't disconnect it for a clutch change. FL2 TD4 GS 60 reg Facelift - so many issues
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Took it in yesterday morning and half an hour later they had sorted it. Didn't actually get the chance to ask exactly what they did but he said he had to make a small adjustment and apologised. No charge.
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5262 ![]() ![]() ![]() |
Glad you got it sorted Jules |
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
