Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > DSC - is this the same as traction control?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
globe



Member Since: 23 Mar 2017
Location: Auckland
Posts: 73

DSC - is this the same as traction control?

As the title suggests is DSC the same as traction control? I have a 07 i6 and went and did a bit of off roading today, i turned off the dsc and popped it into sand mode but upon reading the manual i am not sure i turned off traction control and whether i should have or not, cheers

Post #352895 8th Jul 2018 2:38 am
View user's profile Send private message View poster's gallery Reply with quote
MartynB



Member Since: 08 Aug 2011
Location: Currently Rootless !
Posts: 1781

United Kingdom 2009 Freelander 2 TD4 GS Auto Zermatt Silver

It’s a driver aid to help control situations like oversteer . In some off-road situations it’s actually counter productive so turning it off will not be an issue . 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .

Post #352908 8th Jul 2018 9:10 am
View user's profile Send private message View poster's gallery Reply with quote
globe



Member Since: 23 Mar 2017
Location: Auckland
Posts: 73

Cheers, is it possible to turn off traction control then?? Thanks

Post #352910 8th Jul 2018 9:31 am
View user's profile Send private message View poster's gallery Reply with quote
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799

United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue

DSC is Traction Control really, it limits the power delivery to any wheel that it senses is spinning. One of the side effects with it is it if all 4 wheels start spinning it can cut power killing your momentum. On icy roads if you can't pull away because of wheel slip and DSC killing the power, it's recommended to turn DSC off until moving then switch it back on again. I think in Sand Mode DSC would be automatically turned down, if not off, as you require momentum then. 
Hung like Einstein, smart as a horse.

Post #352915 8th Jul 2018 10:18 am
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3133

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Description from Manual

ABS System Control

The ABS module controls several functions and adjusts the operating parameters of these functions to optimize the selected Terrain Response program.

Traction Control

Traction control uses different slip/acceleration thresholds to improve traction and vehicle composure. For example, the system sensitivity is increased on slippery surfaces such as wet grass or snow to reduce wheel spin. If wheel spin was allowed in these circumstances, loss of traction may result from surface damage (wet grass) or the car being unable to move (snow) due to wheel spin.

Dynamic Stability Control

If DSC is switched off (with the DSC switch adjacent to the Terrain Response rotary control) when using a Terrain Response special program, if the special program is subsequently changed for a different program, DSC is automatically switched back on.

The DSC uses different threshold values for the selected program to automatically reduce DSC intervention, removing the requirement for the driver to disable the DSC system in order to reduce engine intervention which is sometimes induced in extreme off-road conditions. In extreme sand conditions, there may be an additional benefit of disabling the DSC function using the DSC switch in addition to selecting the sand program.

In the Mud/Ruts program the DSC system is calibrated to tolerate a higher 'yaw' threshold. This allows a greater differential between the actual and desired wheel turning behavior before DSC intervenes. This allows the DSC system to ignore the effect of ruts 'jarring' the car or adjusting the front wheel steering angle.

The Terrain Response system can alter the balance between engine and brake intervention. For example, when the sand program is selected, the DSC system reduces its reliance on engine intervention and increases the use of brake intervention to maintain the vehicles momentum and prevent it from becoming bogged down if wheel slip is detected.

Hill Descent Control

HDC is automatically switched on or off and target speeds are adjusted in response to the Terrain Response program selected. The responsiveness of the HDC function is also increased where required.

Automatic operation of HDC aims to assist the driver by switching the system on or off when it is of most benefit. HDC is only automatically switched on when the mud/ruts program is selected. HDC is not automatically selected in other
programs.
 FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Post #352918 8th Jul 2018 12:52 pm
View user's profile Send private message View poster's gallery Reply with quote
globe



Member Since: 23 Mar 2017
Location: Auckland
Posts: 73

Thanks Ian, I don’t see a traction control button on the dash anywhere so presumably this is a auto controlled feature? Does that sound right?

Post #352951 9th Jul 2018 10:00 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site