My 2010 freelander is pulling to the near side and looks like there is slight wear on the out side of the tyre.
Would this be track/ wheel alignment, is the front and back adjustable?

Could be as simple as your tyre pressures, have you checked them ?

All the wheels can be set for alignment and when fitting a new set of matching tyres I would recommend getting a modern service centre with the latest gear to do a full check. This modern centre needs to have trained and capable staff of course so that may rule the likes of Quick Steal. Many find some wear on outer edge of front tyres due to its a heavy 4 WD vehicle so rotating the wheels makes them last longer, front to back not side to side if tyres are rotational. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Yep there ok .

I had the same issue and it turned out to be a warn bush on the control arm. It also showed up when turning into a corner and putting the power down that it steered into the corner more. This wore out the inside edge of my near side tyre (the side the arm was worn) Changed the arm had it tracked and now its all good MY06 FL1 TD4 2 door red (gone)
MY07 FL2 SE TD4 black (gone)
MY13 FL2 GS TD4 Santorini black

Thanks Darren I will check it had the alignment check today ,it was fine.