Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > It never rains...bolts and locks!
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
simong_uk



Member Since: 31 Jan 2014
Location: Sutton Coldfield
Posts: 146

United Kingdom 2014 Freelander 2 TD4 GS Manual Orkney Grey
It never rains...bolts and locks!

Hope there is someone who can set me right...I have two issues that I need help on!

Easy one to start - I took off my Mantec Sump guard to help the garage as I've just had a new turbo... unfortunately I left the correct bolts in place, and LR have 'lost' them, putting a couple of the original sort with the captive washers in to hold the undertray up.... Anyone with a Mantec sump guard let me have the length of their bolts please - I remember there were two different lengths...

And to finish - I've had a new drivers door central locking motor fitted, but now if you unlock it and get in, but don't start the engine, it relocks and sets the alarm, as if it hasn't detected the drivers door opening - anyone have a wiring diagram for the drivers door please?

Thansk

Simon 2000 Xei 1.8 gone
2004 HSE Td4 Auto, MT's, sump guard, sliderz - gone
2014 GS Man - AT's, Mantec Sump guard and tank guard, split charger in boot, towbar, work in progress...

Post #342797 20th Feb 2018 11:35 am
View user's profile Send private message View poster's gallery Reply with quote
Largered



Member Since: 10 Jul 2016
Location: UK
Posts: 1978

Problem 1 ....... original bolts have been 'lost'

Problem 2 ....... Mantec have gone bust.


I recently fitted an original Mantec sump guard, which did not come with fixing bolts. The length of these bolts is NOT a problem as there is a great clearance. The bolts should be vibration proof.


.

Post #342800 20th Feb 2018 12:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Yorky Bob



Member Since: 28 Apr 2015
Location: Yorkshire
Posts: 4561

United Kingdom 2013 Freelander 2 TD4 GS Manual Firenze Red

Not sure what a vibration proof bolt is Shocked A spring washer below a flat washer always seemed to work well enough years ago. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Post #342803 20th Feb 2018 1:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Largered



Member Since: 10 Jul 2016
Location: UK
Posts: 1978



an Anti-Vibration Proof Bolt ........... has limited insertion due to its cut in the main thread.
(which could be why the garage changed it ........ and binned the old bolts ??)


.

Post #342805 20th Feb 2018 1:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Yorky Bob



Member Since: 28 Apr 2015
Location: Yorkshire
Posts: 4561

United Kingdom 2013 Freelander 2 TD4 GS Manual Firenze Red

You learn something new each day on here. Thumbs Up

Shame is at my age you forget twice as much. Rolling with laughter FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Post #342806 20th Feb 2018 1:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Dave47



Member Since: 31 Aug 2014
Location: Margate Kent
Posts: 1333

United Kingdom 2008 Freelander 2 TD4 SE Auto Izmir Blue

I'm with you there YB, Thumbs Up
Dave DAVE.

Post #342817 20th Feb 2018 4:07 pm
View user's profile Send private message View poster's gallery Reply with quote
dunkley201



Member Since: 09 Jul 2011
Location: Lincolnshire
Posts: 2739

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

Old Mr Edwards never taught us about those in basic workshops back in 1964...... Whistle crude or what?

Bob 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

Post #342818 20th Feb 2018 4:14 pm
View user's profile Send private message View poster's gallery Reply with quote
dorsetfreelander



Member Since: 20 Jul 2013
Location: Dorset
Posts: 4354

United Kingdom 2014 Freelander 2 SD4 XS Auto Loire Blue

Never seen bolts like that, was that before they invented Loctite?

My old Dad used to work on Spifires and he said they used locking wire (still used by British Leyland into the 70's) 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Post #342831 20th Feb 2018 5:38 pm
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3126

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Largered
Is this what you mean
http://molabolt.co.uk/products/anti-vibration-molabolt/

As others have said they is new to me. If so, they seem an expensive way of locking a non structural item. (advertised, I think at around £5 each) FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Post #342833 20th Feb 2018 6:03 pm
View user's profile Send private message View poster's gallery Reply with quote
I Like Chips



Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1540

United Kingdom 2011 Freelander 2 SD4 HSE Auto Indus Silver

On your second point..................There is a wiring diagram here

http://www.freel2.com/forum/topic2943.html

Post #342835 20th Feb 2018 7:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Alex.B



Member Since: 27 Apr 2015
Location: Louth,lincs
Posts: 76

United Kingdom 
Re: It never rains...bolts and locks!

simong_uk wrote:
Hope there is someone who can set me right...I have two issues that I need help on!

Easy one to start - I took off my Mantec Sump guard to help the garage as I've just had a new turbo... unfortunately I left the correct bolts in place, and LR have 'lost' them, putting a couple of the original sort with the captive washers in to hold the undertray up.... Anyone with a Mantec sump guard let me have the length of their bolts please - I remember there were two different lengths...

And to finish - I've had a new drivers door central locking motor fitted, but now if you unlock it and get in, but don't start the engine, it relocks and sets the alarm, as if it hasn't detected the drivers door opening - anyone have a wiring diagram for the drivers door please?

Thansk

Simon



1 Get the garage to sort the bolts . 2 get who ever fitted the lock to sort the problem. If you have paid money for something to be done .....

Post #342846 20th Feb 2018 8:16 pm
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3126

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Although I agree with Alex.b that you should allow the person who got it wrong to get it right.

I wonder if it is only the drivers door that is not telling the central locking that it has been opened. (try them all)

I think you will find that each door individually signals " door ajar" to the central locking system and that is where you need to look if its only one door. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Post #342855 20th Feb 2018 9:36 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site