![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Wiper Stalk |
![]() ![]() |
|
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 ![]() |
Does it have something to do with the 'Select' push button switch on the end of the stalk ??
|
||
![]() |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 ![]() ![]() |
Mine is a GS.
|
||
![]() |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 ![]() |
Sorry, in your first post your say 'indicator stalk'
|
||
![]() |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 ![]() ![]() |
My apologies. It's the wiper stalk I need. I've just edited it. ( It's been a long day!!!!) |
||
![]() |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 ![]() ![]() ![]() |
Search Tab me lad |
||
![]() |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 ![]() |
OK. I believe the difference is the Rain Sensor. Early wipers have a pre-select mode for intermittent wipe.. later models have a high. low and Auto mode, the rain sensor determines the 'auto' wipe.
|
||
![]() |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 ![]() ![]() |
Thanks for the reply again, and apologies for the mix up. The guy selling the wiper stalk states that it's off a 2008 and the same spec' as mine. I will double check though before placing the order. |
||
![]() |
|
Dave47 Member Since: 31 Aug 2014 Location: Margate Kent Posts: 1357 ![]() ![]() ![]() |
Anything to do with the VIN number? as I've noticed mine's SALFA xxxxxxxx
|
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1673 ![]() ![]() ![]() |
Bit basic I know but have you checked the pipes are not blocked and pump is working, On a grand vitara I had the back and front washers were on a different pump.???? If it wasn't so bad it'd be funny.
|
||
![]() |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 ![]() ![]() |
Yes. The pump is working because the back washer works. Checked pipes too and all seem okay. When using the back washer, you can here the pump, but nothing when the front is tried. I've been told it's not the fuse (as the back is working) and not the pump. Not sure what it is, so going to buy a 2nd hand stalk and hope for the best. |
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1673 ![]() ![]() ![]() |
I take it the freelander only has a single pump then? sorry can't help further |
||
![]() |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 ![]() ![]() |
According to what another member told me, it's just the one pump. |
||
![]() |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 ![]() |
Yes the FL2 has a single pump. The FL1 had two separate pumps.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
