Is there a brand of roof rack that fits directly to the vehicle (no rails) and does not use clamps?

If you measure the XYZ coordinates of fittings & get an engineering shop to make up some brackets it will be better quality & cheaper than any off the shelf product. Someone here has done it.

Failing that, four cross bars on the rails works very well. Pretty much the Australian procedure for all 4WD! The cheapest & lightest solution. http://www.freel2.com/forum/topic30944.html Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Yes Front Runner do one. Click on link below.

http://www.freel2.com/forum/topic30944.html


Before I custom built mine, I used two sets of cross bars. Problem I had was the cross bars are AERO wing shaped (banana) and do not allow my roof top tent to sit flat.