Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > Change rear (boot) 12v socket to work ignition on
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Dz0rpw



Member Since: 06 Dec 2015
Location: Hampshire
Posts: 28

United Kingdom 2010 Freelander 2 SD4 HSE Auto Galway Green
Change rear (boot) 12v socket to work ignition on

Hi Guys,

Is there a simple way to change the way the rear (boot) 12v socket works? I have a Dashcam plugged in but over time it will drain the battery. I've had a quick look at the wiring diagrams and it seems to take a completely different route to the front drivers socket.

Any quick fixes...?

Dz

Post #339794 18th Jan 2018 5:59 pm
View user's profile Send private message View poster's gallery Reply with quote
blacktiger



Member Since: 31 Oct 2015
Location: St.Leonards on sea
Posts: 564

England 2013 Freelander 2 SD4 HSE Auto Santorini Black

I'm pretty sure that mine goes off with the ignition because on my last European trip I had a cooler plugged into it and it kept stopping shortly after I'd turned off the engine. MY13 Santorini Black SD4 HSE

Post #339807 18th Jan 2018 7:26 pm
View user's profile Send private message View poster's gallery Reply with quote
Bibendum



Member Since: 20 Oct 2015
Location: Home in Lancashire
Posts: 170

United Kingdom 2014 Freelander 2 TD4 XS Manual Indus Silver

Mine also goes off with the ignition - sort of!

It doesn't go off straight away but when the interior lights go off - which can give the impression it isn't ignition switched. Easiest way to check is to plug a lamp or something with an LED into the socket, then lock the car and wait a few seconds.

Post #339816 18th Jan 2018 8:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Largered



Member Since: 10 Jul 2016
Location: UK
Posts: 1978

I have a 2009 GS.

I changed the 12V aux socket for a twin USB set of sockets ....... which has a blue LED ..... that shows its 'ON'
KEPT the original wiring thou.

Locked the vehicle two hours ........ LED indicator ...... still 'ON'

??????


So to change this, you need to find a Switched Live from the boot fuse box and rewire it.
I know there is a Switched Live in the box ......... as I have used it already.


Good Luck

Post #339817 18th Jan 2018 8:49 pm
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3134

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Pre MY13 FL2s have simpler logic to their wiring and although the forward 12v outlet on the consul is ignition controlled, the rear consul socket and the boot supply outlet is permanently on.
MY13 onwards the control logic gradually powers down all ancilliaries in stages and the boot outlet powers down after a short while. There is no permanment supply on these later FL2s.

(thanks grod you are right about the rear consul socket, and I have edited above) FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)


Last edited by IanMetro on 19th Jan 2018 5:45 pm. Edited 1 time in total

Post #339827 18th Jan 2018 10:50 pm
View user's profile Send private message View poster's gallery Reply with quote
Yorky Bob



Member Since: 28 Apr 2015
Location: Yorkshire
Posts: 4561

United Kingdom 2013 Freelander 2 TD4 GS Manual Firenze Red

No logic there then for keeping beers cold 24 / 7 Big Cry FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Post #339844 19th Jan 2018 9:38 am
View user's profile Send private message View poster's gallery Reply with quote
Dz0rpw



Member Since: 06 Dec 2015
Location: Hampshire
Posts: 28

United Kingdom 2010 Freelander 2 SD4 HSE Auto Galway Green

No problem keeping the beers cold...you can sit there and drink them while you re-charge your battery Smile

Just to confirm guys...the rear console and boot sockets remain on all the time on my MY10 sd4 HSE. Only the front console socket switches off. Just been outside and the rear window has a nice frost-free area above to the dashcam...it's always on.

Post #339861 19th Jan 2018 11:47 am
View user's profile Send private message View poster's gallery Reply with quote
blacktiger



Member Since: 31 Oct 2015
Location: St.Leonards on sea
Posts: 564

England 2013 Freelander 2 SD4 HSE Auto Santorini Black

I can confirm that it stayed on in my 59 plate TD4e. But on my new(er) MY13 it goes off. MY13 Santorini Black SD4 HSE

Post #339865 19th Jan 2018 12:21 pm
View user's profile Send private message View poster's gallery Reply with quote
grod



Member Since: 05 Dec 2015
Location: Branxton
Posts: 110

Australia 

The rear socket on the console (just left of the driver's seat) of my TD4 (MY11) is constantly on too.

I fitted a Power Magic Pro for my BlackVue dash-cam to prevent battery drain.


g

Post #339884 19th Jan 2018 4:09 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site